Workholding - Tooling & Acc. - End & Shell Mill Holders - Shrinkfit Holders - (4832 Products)
5/8 STRT SHK 1/4 SHRINK FIT EXT
Item #: GM76502137
Manufacturer: Lyndex
Mfg #: ST62-SF025
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 1-1/4 x 3.94 - Shrink Fit Tool Holder
Item #: GM94C50123949
Manufacturer: Parlec
Mfg #: C50-12SF39
Technical Specifications:
*Bore Diameter: 1-1/4
*Brand Name: Parlec
*Gage Length: 3.940
*Model Number: C50-12SF394-9
*Shank: CAT50
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 8.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
16MM-6MMX160MM GL SHRINK EXTENSION
Item #: HA717716006
Manufacturer: Haimer USA LLC
Mfg #: 77.160.06
Technical Specifications:
*Brand Name: Haimer USA LLC
Description:
Shipping Info:
*Actual Weight - .5500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 100A 5/8"-100mm - Shrink Fit Holder
Item #: TE1239318
Manufacturer: Techniks
Mfg #: 39318
Technical Specifications:
*Bore Diameter: 5/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 15.9mm
*Gage Length: 100mm
*Outside Diameter: 3.94
*Shank: 5/8
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 5/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .3500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 1"-4.13" - Shrink Fit Holder with Coolblast
Item #: TE1229068B
Manufacturer: Techniks
Mfg #: 29068B
Technical Specifications:
*Bore Diameter: 1
*Brand Name: Techniks
*European-DIN Tool Shank Range: 25.4mm
*Gage Length: 4.13
*Outside Diameter: 3.88
*Shank: 1
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 1
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*CoolBLAST allows for in-the-bore coolant delivery onto the work piece
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .5562
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
ER32 SRK 3X35 SHRINK FIT HOLDER
Item #: EH4509206
Manufacturer: Iscar
Mfg #: 4509206
Technical Specifications:
*Brand Name: Iscar
Description:
Shipping Info:
*Actual Weight - .3920
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1" CAT 40 Shrink Fit Toolholder - 4.0" Gauge Length
Item #: GM30100400
Manufacturer: Briney
Mfg #: V40SF-100-
Technical Specifications:
*Bearing Surface: 1.250
*Bore Diameter: 1
*Brand Name: Briney
*Gage Length: 4.000
*Outside Diameter: 1.750
*Shank: CAT40
*Standard: ANSI
*Type: CV Shrink Fit
Description:
*Materials certified and traceable to NIST standards
*360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity
*Balanced to 20,000 RPM at G2.5
*Maximum .0002? T.I.R. or better
*Certified H-13 material
Shipping Info:
*Actual Weight - 4.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 1/4 x 2.56 Power Shrink Fit Chuck
Item #: HA714084514Z3
Manufacturer: Haimer USA LLC
Mfg #: 40.845.1/4
Technical Specifications:
*Bore Diameter: 1/4
*Brand Name: Haimer USA LLC
*Gage Length: 2.56
*Model Number: 40.845.1/4Z.3
*Outside Diameter: 1.06
*Shank: CAT40
*Type: Power Shrink Fit Chuck
Description:
*Shrink fit chuck suitable to all inductive shrink fit units
*Precesion AT3 Tolerance Shank
*Balanced to G2.5 at 25,000 RPM or U < 1 gmm
*Taper tolerance AT3
*High runout accuracy < 3µ¼m
*Low tendency towards vibrationos by optimized outer geometry
*Slim desgin at the top
*Very rigid shank
*Dirt groove in the clamping bore for safe clamping force
*Coolant supply fromr ADB
*Cool Jet, can be sealed
*Made in Germany
Shipping Info:
*Actual Weight - 2.5000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 40E 4mm-80mm - Shrink Fit Holder
Item #: TE1239084E
Manufacturer: Techniks
Mfg #: 39084-E
Technical Specifications:
*Bore Diameter: 4mm
*Brand Name: Techniks
*European-DIN Tool Shank Range: 4mm
*Gage Length: 80mm
*Outside Diameter: 2.36
*Shank: 4mm
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 0.16
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - 1.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK 40E 3/8"-3.54" - Shrink Fit Holder
Item #: TE1239008E
Manufacturer: Techniks
Mfg #: 39008-E
Technical Specifications:
*Bore Diameter: 3/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 9.5mm
*Gage Length: 3.54
*Outside Diameter: 2.36
*Shank: 3/8
*Standard: ISO 1940
*Type: Shrink Fit HSK Holder
*USA-ANSI Tool Shank Range: 3/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - 1.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CT50-SLK12-75
Item #: TP349910004
Manufacturer: OSG USA, Inc.
Mfg #: 9910004
Technical Specifications:
*Brand Name: OSG USA, Inc.
*List No.: SHRINK
Description:
Shipping Info:
*Actual Weight - 7.9500
*Dimensions - Height: 5.15 Length: 9.40 Width: 5.45
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HSK63 1/2 x 3.54 - Shrink Fit Tool Holder
Item #: GM94H63503549
Manufacturer: Parlec
Mfg #: H63A-50SF3
Technical Specifications:
*Bore Diameter: 1/2
*Brand Name: Parlec
*Gage Length: 3.540
*Model Number: H63A-50SF354-9
*Shank: HSK63A
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CS12-1/8-80
Item #: TP349910076
Manufacturer: OSG USA, Inc.
Mfg #: 9910076
Technical Specifications:
*Brand Name: OSG USA, Inc.
*List No.: SHRINK
Description:
Shipping Info:
*Actual Weight - .4550
*Dimensions - Height: 1.20 Length: 5.05 Width: 1.30
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 32mm x 100mm Shrink Fit Chuck
Item #: HA7140840324
Manufacturer: Haimer USA LLC
Mfg #: 40.840.32.
Technical Specifications:
*Bore Diameter: 32mm
*Brand Name: Haimer USA LLC
*Gage Length: 100mm
*Model Number: 40.840.32.4
*Outside Diameter: 53mm
*Shank: CAT40
*Type: Shrink Fit Chuck
Description:
*Shrink fit chuck suitable to all kind of shrink fit units
*Fine balanced to G2.5 at 25,000 RPM
*Certified AT3 Taper
*High runout accuracy < 3µ¼m
*Heat resistant hot-working steel
*Hardened 54-2 HRC
*For HSS and solid carbide tools
*Shank tolerance h6
*With threaded holes in order to balance with balancing screws
*Cool Jet coolant bores that can be sealed included
*Made in Germany
Shipping Info:
*Actual Weight - 4.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8-1/8X6.30"GL SHRINK EXTENSION
Item #: HA717758Z018Z
Manufacturer: Haimer USA LLC
Mfg #: 77.5/8Z0.1
Technical Specifications:
*Brand Name: Haimer USA LLC
Description:
Shipping Info:
*Actual Weight - .5500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
20MM-6MMX SHRINK EXTENSION
Item #: HA717820006
Manufacturer: Haimer USA LLC
Mfg #: 78.200.06
Technical Specifications:
*Brand Name: Haimer USA LLC
Description:
Shipping Info:
*Actual Weight - .7700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT30 3/8X2.36"GL SHRINK FIT CHUCK
Item #: HA713064538Z
Manufacturer: Haimer USA LLC
Mfg #: 30.645.3/8
Technical Specifications:
*Brand Name: Haimer USA LLC
Description:
Shipping Info:
*Actual Weight - 1.2100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CF12-12-55
Item #: TP348910066
Manufacturer: OSG USA, Inc.
Mfg #: 8910066
Technical Specifications:
*Brand Name: OSG USA, Inc.
*List No.: SHRINK
Description:
Shipping Info:
*Actual Weight - .5600
*Dimensions - Height: 1.20 Length: 4.05 Width: 1.30
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4 -3/8 X6.30"GL SHRINK EXTENSION
Item #: HA717834Z038Z1
Manufacturer: Haimer USA LLC
Mfg #: 78.3/4Z0.3
Technical Specifications:
*Brand Name: Haimer USA LLC
Description:
Shipping Info:
*Actual Weight - .5500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4" CAT 40 Shrink Fit Toolholder - 3.15" Gauge Length
Item #: GM30025315D
Manufacturer: Briney
Mfg #: V40SF-025-
Technical Specifications:
*Bearing Surface: 1.042
*Bore Diameter: 1/4
*Brand Name: Briney
*Gage Length: 3.150
*Outside Diameter: .984
*Shank: CAT40
*Standard: DIN
*Type: CV Shrink Fit
Description:
*Materials certified and traceable to NIST standards
*360 degree Tool grip along the entire length of bore resulting in an evenly distributed clamping force and superior concentricity
*Balanced to 20,000 RPM at G2.5
*Maximum .0002? T.I.R. or better
*Certified H-13 material
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It