Workholding - Tooling & Acc. - End & Shell Mill Holders - Shrinkfit Holders - (4832 Products)
1" TO 1/2" - Shrink Fit Extension
Item #: TE1286092
Manufacturer: Techniks
Mfg #: 86092
Technical Specifications:
*Bore Diameter: 1/2
*Brand Name: Techniks
*European-DIN Tool Shank Range: 12.7mm
*Outside Diameter: 1
*Shank: 1/2
*Standard: ISO 1940
*Type: Shrink Fit Straight Shank Extension
*USA-ANSI Tool Shank Range: 1/2
Description:
*Extend the reach of your existing holders
*Better rigidity and T.I.R. extends tool life
*Works with a variety of tool holder
Shipping Info:
*Actual Weight - .0687
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 5/8 x 3.15 - Shrink Fit Tool Holder
Item #: GM94C40623159
Manufacturer: Parlec
Mfg #: C40-62SF31
Technical Specifications:
*Bore Diameter: 5/8
*Brand Name: Parlec
*Gage Length: 3.150
*Model Number: C40-62SF315-9
*Shank: CAT40
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 6mm x 80mm Shrink Fit Chuck
Item #: HA7140840064
Manufacturer: Haimer USA LLC
Mfg #: 40.840.06.
Technical Specifications:
*Bore Diameter: 6mm
*Brand Name: Haimer USA LLC
*Gage Length: 80mm
*Model Number: 40.840.06.4
*Shank: CAT40
*Type: Shrink Fit Chuck
Description:
*Shrink fit chuck suitable to all kind of shrink fit units
*Fine balanced to G2.5 at 25,000 RPM
*Certified AT3 Taper
*High runout accuracy < 3µ¼m
*Heat resistant hot-working steel
*Hardened 54-2 HRC
*For HSS and solid carbide tools
*Shank tolerance h6
*With threaded holes in order to balance with balancing screws
*Cool Jet coolant bores that can be sealed included
*Made in Germany
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 1/4"-3" - Shrink Fit Holder
Item #: TE1229010
Manufacturer: Techniks
Mfg #: 29010
Technical Specifications:
*Bore Diameter: 1/4
*Brand Name: Techniks
*European-DIN Tool Shank Range: 6.4mm
*Gage Length: 3
*Outside Diameter: 2.5
*Shank: 1/4
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 1/4
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .1656
*Dimensions - Height: 3.00 Length: 5.75 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 1/8-3.5" - Shrink Fit Holder
Item #: TE1229002
Manufacturer: Techniks
Mfg #: 29002
Technical Specifications:
*Bore Diameter: 1/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 3.2mm
*Gage Length: 3.5
*Outside Diameter: 2.5
*Shank: 1/8
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 1/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - 2.4500
*Dimensions - Height: 3.00 Length: 6.00 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT40 1/4 x 3.54 - Shrink Fit Tool Holder
Item #: GM94BT40253549
Manufacturer: Parlec
Mfg #: BT40-25SF3
Technical Specifications:
*Bore Diameter: 1/4
*Brand Name: Parlec
*Gage Length: 3.540
*Model Number: BT40-25SF354-9
*Shank: BT40
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 1/2"-6" - Shrink Fit Holder
Item #: TE1229030
Manufacturer: Techniks
Mfg #: 29030
Technical Specifications:
*Bore Diameter: 1/2
*Brand Name: Techniks
*European-DIN Tool Shank Range: 12.7mm
*Gage Length: 6
*Outside Diameter: 2.5
*Shank: 1/2
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 1/2
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .2481
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 1/2"-3.75" - Shrink Fit Holder wih Port
Item #: TE1229027FB
Manufacturer: Techniks
Mfg #: 29027FB
Technical Specifications:
*Bore Diameter: 1/2
*Brand Name: Techniks
*European-DIN Tool Shank Range: 12.7mm
*Gage Length: 3.75
*Outside Diameter: 2.5
*Shank: 1/2
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 1/2
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*CoolFLEX (DIN B) Coolant through the flange as well as through the spindle
*CoolBLAST allows for in-the-bore coolant delivery onto the work piece
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .1843
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 1/2"-3.94" - Shrink Fit Holder with Coolblast
Item #: TE1229060B
Manufacturer: Techniks
Mfg #: 29060B
Technical Specifications:
*Bore Diameter: 1/2
*Brand Name: Techniks
*European-DIN Tool Shank Range: 12.7mm
*Gage Length: 3.94
*Outside Diameter: 3.88
*Shank: 1/2
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 1/2
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*CoolBLAST allows for in-the-bore coolant delivery onto the work piece
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .4875
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 3/4"-4.13" - Shrink Fit Holder
Item #: TE1229064
Manufacturer: Techniks
Mfg #: 29064
Technical Specifications:
*Bore Diameter: 3/4
*Brand Name: Techniks
*European-DIN Tool Shank Range: 19.1mm
*Gage Length: 4.13
*Outside Diameter: 3.88
*Shank: 3/4
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 3/4
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .5156
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4" TO 3/8" - Shrink Fit Extension
Item #: TE1286080
Manufacturer: Techniks
Mfg #: 86080
Technical Specifications:
*Bore Diameter: 3/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 9.5mm
*Outside Diameter: 3/4
*Shank: 3/8
*Standard: ISO 1940
*Type: Shrink Fit Straight Shank Extension
*USA-ANSI Tool Shank Range: 3/8
Description:
*Extend the reach of your existing holders
*Better rigidity and T.I.R. extends tool life
*Works with a variety of tool holders
Shipping Info:
*Actual Weight - .0375
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 5/8"-95.3mm - Shrink Fit Holder
Item #: TE1229032
Manufacturer: Techniks
Mfg #: 29032
Technical Specifications:
*Bore Diameter: 5/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 15.9mm
*Gage Length: 95.3mm
*Outside Diameter: 2.5
*Shank: 5/8
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 5/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .2481
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 8mm-100mm - Shrink Fit Holder
Item #: TE1229212
Manufacturer: Techniks
Mfg #: 29212
Technical Specifications:
*Bore Diameter: 8mm
*Brand Name: Techniks
*European-DIN Tool Shank Range: 8mm
*Gage Length: 100mm
*Outside Diameter: 2.5
*Shank: 8mm
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 0.31
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - 2.8500
*Dimensions - Height: 3.00 Length: 6.60 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 3/4 x 3.15 - Shrink Fit Tool Holder
Item #: GM94C40753159
Manufacturer: Parlec
Mfg #: C40-75SF31
Technical Specifications:
*Bore Diameter: 3/4
*Brand Name: Parlec
*Gage Length: 3.150
*Model Number: C40-75SF315-9
*Shank: CAT40
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8" TO 1/4" - Shrink Fit Extension
Item #: TE1286066
Manufacturer: Techniks
Mfg #: 86066
Technical Specifications:
*Bore Diameter: 1/4
*Brand Name: Techniks
*European-DIN Tool Shank Range: 6.4mm
*Outside Diameter: 5/8
*Shank: 1/4
*Standard: ISO 1940
*Type: Shrink Fit Straight Shank Extension
*USA-ANSI Tool Shank Range: 1/4
Description:
*Extend the reach of your existing holders
*Better rigidity and T.I.R. extends tool life
*Works with a variety of tool holders
Shipping Info:
*Actual Weight - .0281
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8" TO 1/8" - Shrink Fit Extension
Item #: TE1286062
Manufacturer: Techniks
Mfg #: 86062
Technical Specifications:
*Bore Diameter: 1/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 3.2mm
*Outside Diameter: 5/8
*Shank: 1/8
*Standard: ISO 1940
*Type: Shrink Fit Straight Shank Extension
*USA-ANSI Tool Shank Range: 1/8
Description:
*Extend the reach of your existing holders
*Better rigidity and T.I.R. extends tool life
*Works with a variety of tool holders
Shipping Info:
*Actual Weight - .4500
*Dimensions - Height: 1.30 Length: 6.30 Width: 1.30
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 3/4"-3" - Shrink Fit Holder
Item #: TE1229034
Manufacturer: Techniks
Mfg #: 29034
Technical Specifications:
*Bore Diameter: 3/4
*Brand Name: Techniks
*European-DIN Tool Shank Range: 19.1mm
*Gage Length: 3
*Outside Diameter: 2.5
*Shank: 3/4
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 3/4
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .2481
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 3/8-3" - Shrink Fit Holder
Item #: TE1229020
Manufacturer: Techniks
Mfg #: 29020
Technical Specifications:
*Bore Diameter: 3/8
*Brand Name: Techniks
*European-DIN Tool Shank Range: 9.5mm
*Gage Length: 3
*Outside Diameter: 2.5
*Shank: 3/8
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 3/8
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - .1931
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT40 1/2 x 3.54 - Shrink Fit Tool Holder
Item #: GM94BT40503549
Manufacturer: Parlec
Mfg #: BT40-50SF3
Technical Specifications:
*Bore Diameter: 1/2
*Brand Name: Parlec
*Gage Length: 3.540
*Model Number: BT40-50SF354-9
*Shank: BT40
*Standard: DIN
Description:
*Shrink Fit Tool Holder
*Improved concentricity
*Improved balance design with no moving pieces
*Low Centrifugal Forces due to low holder mass
*For maximum gripping power with exceptional concentricity
*Concentricity of .0001" with tool shrunk in holder
*Chip load distributed evenly along cutting edge of tool which results in longer tool life
*Constructed of double tempered Tool Steel for exceptional durability and cycle life
*With proper use, toolholder life should exceed that of standard end mill holders
*Tool is gripped 360° along the entire length of bore resulting in an evenly distributed clamping force
*Short projections are possible because no mechanical clamping devices are used
*This results in greater rigidity and resistance to bending
*Simple and fast to use
*The total time elapsed to remove one cutting tool and insert another is less than 10 seconds
*Through-spindle coolant capability
*Coolant through holders require no special backup screws or seals
*The interference fit between the ID of the tool holder and cutting tool shank forms the seal, preventing the coolant from flowing anywhere else except through the coolant grooves
*The use of Heat Shrink Tooling allows for greater speeds and feeds, better finishes, increased tool life, and increased productivity due to its High Speed Machining capability and simplicity of use
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 6mm-100mm - Shrink Fit Holder
Item #: TE1229208
Manufacturer: Techniks
Mfg #: 29208
Technical Specifications:
*Bore Diameter: 6mm
*Brand Name: Techniks
*European-DIN Tool Shank Range: 6mm
*Gage Length: 100mm
*Outside Diameter: 2.5
*Shank: 6mm
*Standard: ISO 1940
*Type: Shrink Fit CAT Holder
*USA-ANSI Tool Shank Range: 0.24
Description:
*ShrinkFIT tooling improves cutting tool life, cutting ability, and surface finish
*ShrinkFIT produces less wear and tear on the spindle bearings
*Ideal for high-speed or high-torque machining
*Maximum T.I.R. is 0.0001"
*Each holder is lab certified for accuracy and comes with an individual lab report
*Tool holders are balanced at 25,000 to G2.5 tolerance
*Each holder comes with a coolant-thru set screw installed
Shipping Info:
*Actual Weight - 2.8500
*Dimensions - Height: 3.20 Length: 6.65 Width: 3.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It