BES Up To 2022 $100-$250 Products - (25001 Products)
CIMTECH® 3150VLZ - 5 Gallon
Item #: LL5101205P
Manufacturer: Cimcool
Mfg #: 01205-P
Technical Specifications:
•Brand Name: Cimcool
•Hazard Code: HAZ58
•Size: 5 Gallon
Description:
Shipping Info:
•HAZ 58
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 48.1500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
6 x 2 x 1" - Fine Grit - 7SF - Silicon Carbide - Bear-Tex Convolute Non-Woven Wheel
Item #: MH62W0655227
Manufacturer: Norton Abrasives
Mfg #: 6626105522
Technical Specifications:
*Arbor Hole: 1
*Brand Name: Norton Abrasives
*Density: 7SF
*Diameter: 6
*Face Width: 2
*Grit: Fine
*Material: Silicon Carbide
*Maximum RPM: 6,000
*Size: 6 x 2 x 1
*Standard Pack: 25
*Trade Name: Bear-Tex
*Type: Convolute Non-Woven Wheel
Description:
*Fine grit provides a reduced cut rate and is recommended for better finishes and form holding
*Silicon carbide is a sharper more aggressive abrasive and leaves a fine/brighter scratch pattern
*Best choice for heavy deburring applications
*Lubricants such as water-soluble oil and straight oil will decrease the heat and improve the surface finish and luster
*More open web construction (7 density) for cool cutting on light deburring applications
*Convolute wheels are wound around a core and must always be run in the direction of the arrow printed on the side of the wheel
*Durable aluminum reducing bushings are available to accommodate most arbor sizes
Shipping Info:
*Actual Weight - 2.7500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 7/8 x 1-1/2 - Oil Hardening Flat Stock
Item #: LY5105604
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: O-1
*Thick: 7/8
*Width: 1-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 13.5250
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/4 x 3/4 - Oil Hardening Flat Stock
Item #: LY4054476
Manufacturer: Starrett
Mfg #: 54476
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 3/4
*Width: 3/4
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 5.8200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
47C02020W4RQ60 IN2505
Item #: IC045669382
Brand: Ingersoll
Model #: 5669382
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 0.787″ |
| End Shape | Chamfer |
| Connection Diameter Machine Side (DCONMS) | 0.787″ |
| Applicable Material | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials |
| Depth of Cut Maximum (APMX) | 0.787″ |
| Application | || Facing | | |
| Overall Length (OAL) | 3.622″ |
| Corner Radius (RE) | 0.600 Chamfer |
| Cutting Edge Material | Carbide |
| Corner Chamfer Width (CHW) | 0.600 Chamfer |
| Coating | TiAlN+TiN |
| Grade | IN2505 |
| Flute Count (NOF) | 4″ |
| Body Material | Steel |
| Flute Helix Angle (FHA) | 35-37 |
| Decimal Equivalent | 0.787″ |
| Shank Type | - |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.7 mm Dia. × 8.1 mm Shank × 77 mm Flute Length × 124 mm OAL, 5xD, TiAlN, 2xD Flute, Coolant Thru, H6 Solid Carbide Drill
Item #: TP45HP2555394
Brand: OSG USA, Inc.
Model #: HP255-5394
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.7 mm |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.7 mm |
| Tool Type | Solid Carbide |
| Length Group | 5xD |
| Measurement Type | Metric |
| Coating | EgiAs |
| Series/List # | HP255 |
| Applicable Material | Steel | Stainless Steel | Aluminum / Non-Ferrous Materials | Super-Alloys / Titanium | Hard Materials |
| Usable Length (LU) | 77 mm |
| Connection Diameter Machine Side (DCONMS) | 8.1 mm |
| Length Chip Flute (LCF) | 77 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 124 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 77 mm |
| Cutting Direction (HAND) | Right Hand |
| Shank Type | H6 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
47C-757584RQ02 IN2205
Item #: IC045669394
Brand: Ingersoll
Model #: 5669394
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Non Ferrous Metals | Hi Temp Alloys | |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Application | | Drill Mill | Drilling | Helical Interpolation | Rampdown | Shouldering | Slotting | |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Grade | IN2205 |
| Overall Length (OAL) | 4″ |
| Body Material | Steel |
| Coating | AlTiCrSiN |
| Decimal Equivalent | 3/4″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 35-37 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.023 Chamfer |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SBB D25.4-6
Item #: EH366862223
Brand: Iscar
Model #: 6862223
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Tool Type | Round Shanks |
| Shank Height (H) | 0.945″ |
| Body Material | Steel |
| Connection Diameter Workpiece Side (DCONWS) | 0.236″ |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MTECS 03016C11 56UN IC908
Item #: EH5667134
Brand: Iscar
Model #: 5667134
| Product Specifications | |
|---|---|
| Thread Size | 2 |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
| Thread Pitch (TP) | 0.454 mm |
| Cutting Edge Material | Carbide |
| Threads per Inch (TPI) | 56 Threads/" |
| Cutting Position | Internal |
| Thread Standard | UNC |UNF |THFT | |
| Usable Length (LU) | 11.4 mm |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Measurement Type | Metric |
| Cutting Diameter (DC) | 1.65 mm |
| Grade | IC908 |
| Overall Length (OAL) | 39 mm |
| Tool Type | Solid carbide thread mills |
| Flute Count (NOF) | 3 |
| Body Material | Carbide |
| Shank Type | Round |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Coating | TiAlN |
| Thread Form Type (THFT) | UN60 |
| Application | | Internal Thread Milling | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MTECS 03007C2 0.25ISO IC908
Item #: EH5606859
Brand: Iscar
Model #: 5606859
| Product Specifications | |
|---|---|
| Thread Size | M1 |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
| Thread Pitch (TP) | 0.25 mm |
| Cutting Edge Material | Carbide |
| Thread Standard | THFT | |
| Cutting Position | Internal |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Usable Length (LU) | 2.5 mm |
| Cutting Diameter (DC) | 0.72 mm |
| Measurement Type | Metric |
| Overall Length (OAL) | 39 mm |
| Grade | IC908 |
| Flute Count (NOF) | 3 |
| Tool Type | Solid carbide thread mills |
| Shank Type | Round |
| Body Material | Carbide |
| Coating | TiAlN |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Application | | Internal Thread Milling | |
| Thread Form Type (THFT) | M60 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MTECS 03016C9 56UN IC908
Item #: EH5667130
Brand: Iscar
Model #: 5667130
| Product Specifications | |
|---|---|
| Thread Size | 2 |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
| Thread Pitch (TP) | 0.454 mm |
| Cutting Edge Material | Carbide |
| Threads per Inch (TPI) | 56 Threads/" |
| Cutting Position | Internal |
| Thread Standard | UNC |UNF |THFT | |
| Usable Length (LU) | 9.2 mm |
| Connection Diameter Machine Side (DCONMS) | 3 mm |
| Measurement Type | Metric |
| Cutting Diameter (DC) | 1.65 mm |
| Grade | IC908 |
| Overall Length (OAL) | 39 mm |
| Tool Type | Solid carbide thread mills |
| Flute Count (NOF) | 3 |
| Body Material | Carbide |
| Shank Type | Round |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Coating | TiAlN |
| Thread Form Type (THFT) | UN60 |
| Application | | Internal Thread Milling | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
MTECS 08077C35 14UN IC908
Item #: EH5667141
Brand: Iscar
Model #: 5667141
| Product Specifications | |
|---|---|
| Thread Size | 7/16 |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Hi Temp Alloys | |
| Thread Pitch (TP) | 1.814 mm |
| Cutting Edge Material | Carbide |
| Threads per Inch (TPI) | 14 Threads/" |
| Cutting Position | Internal |
| Thread Standard | UNC |THFT | |
| Usable Length (LU) | 35.2 mm |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Measurement Type | Metric |
| Cutting Diameter (DC) | 7.7 mm |
| Grade | IC908 |
| Overall Length (OAL) | 64 mm |
| Tool Type | Solid carbide thread mills |
| Flute Count (NOF) | 3 |
| Body Material | Carbide |
| Shank Type | Round |
| Connection Code Machine Side (CCMS) | Cylindrical |
| Coating | TiAlN |
| Thread Form Type (THFT) | UN60 |
| Application | | Internal Thread Milling | |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FLEXFIT 220-HOLDER-DCN-MS
Item #: EH323320330
Brand: Iscar
Model #: 3320330
| Product Specifications | |
|---|---|
| Overall Length (OAL) | 1.89″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 0.866″ |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FLEXFIT 200-HOLDER-DCN-MS
Item #: EH323320329
Brand: Iscar
Model #: 3320329
| Product Specifications | |
|---|---|
| Overall Length (OAL) | 1.417″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 0.787″ |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
FLEXFIT 1905-HOLDER-DCNMS
Item #: EH323357617
Brand: Iscar
Model #: 3357617
| Product Specifications | |
|---|---|
| Overall Length (OAL) | 1.417″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
47C-7575S7RQ02 IN2205
Item #: IC045669393
Brand: Ingersoll
Model #: 5669393
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Applicable Material | | Steel | Stainless Steel | Cast Iron | Hard Materials | Non Ferrous Metals | Hi Temp Alloys | |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Application | | Drill Mill | Drilling | Helical Interpolation | Rampdown | Shouldering | Slotting | |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Grade | IN2205 |
| Overall Length (OAL) | 4″ |
| Body Material | Steel |
| Coating | AlTiCrSiN |
| Decimal Equivalent | 3/4″ |
| Flute Count (NOF) | 4 |
| Measurement Type | Inch |
| Flute Helix Angle (FHA) | 35-37 Degrees |
| Corner Radius (RE) / Chamfer Width (CHW) | 0.023 Chamfer |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CXS-10-04FN Rectangular Shank To CoroTurn® XS Adaptor
Item #: FF8155757
Manufacturer: Sandvik Coromant
Mfg #: 6074987
Technical Specifications:
•Brand Name: Sandvik Coromant
Description:
Shipping Info:
•Actual Weight - .6300
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CXS-10-05FN Rectangular Shank To CoroTurn® XS Adaptor
Item #: FF8155758
Manufacturer: Sandvik Coromant
Mfg #: 6074988
Technical Specifications:
•Brand Name: Sandvik Coromant
Description:
Shipping Info:
•Actual Weight - .6400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CXS-10-06FN Rectangular Shank To CoroTurn® XS Adaptor
Item #: FF8155759
Manufacturer: Sandvik Coromant
Mfg #: 6074989
Technical Specifications:
•Brand Name: Sandvik Coromant
Description:
Shipping Info:
•Actual Weight - .6400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CXS-10-07FN Rectangular Shank To CoroTurn® XS Adaptor
Item #: FF8155760
Manufacturer: Sandvik Coromant
Mfg #: 6074990
Technical Specifications:
•Brand Name: Sandvik Coromant
Description:
Shipping Info:
•Actual Weight - .6500
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It