Products

• Mini Screwdriver, 1/8″ Cabinet, 3″ Shank
• Mini Screwdriver, 3/32″ Cabinet Tip, 3″
• 8 mm Hex Key with Journeyman T-Handle, 6″
• 3/16″ Cabinet Tip Screwdriver 4″ Shank
• Folding Hex Key Set, Eight-Key, 1/20 to 5/32″ SAE
• ‎Drill Tap, 10-24
• ‎Drill Tap, 12-24
• Safety Glasses Hard Case
• 5/16″ Hex Key with Journeyman T-Handle, 6″
• Adjustable Wire Stop/Gauge for Katapult® Stripper
• Ratchet Release Plate for Pre-2017 Cat. No. 63060
• 7/8″ Standard 12-Point Socket, 1/2″ Drive
• 11/16″ Standard 12-Point Socket 1/2″ Drive
• 5/8″ Spark Plug Socket 1/2″ Drive
• 13/16″ Standard 12-Point Socket 1/2″ Drive
• 3/4″ Standard 12-Point Socket, 1/2″ Drive
• 5/8″ Spark Plug Socket, 3/8″ Drive
• Klein Cooling Towel, Gray
• Klein Cooling Towel, Blue
• Cable Splicer Knife Holder, Slotted Connection
• 7/32″ Ball Hex Key, Journeyman T-Handle 6″
• 5/16″ Hex Key with Journeyman T-Handle, 4″
• SCHRADR VLV CORE REPL BIT
• 1/4″ Hex Key with Journeyman T-Handle, 9″
• #0 Phillips Pocket Clip Screwdriver
• Pro Impact Power Bit Extension 1/4″ Hex
• Screwdriver, 1/8″ Cabinet Tip, 6″
• Secondary Blade Barrel Replacement
• 1/8″ Cabinet Screwdriver 4″ Round Shank
• Screwdriver, 1/8″ Cabinet, Pocket Clip, 3″
• Top Sleeve Screws for Climbers
• 11 mm Nut Driver, 3″ Hollow Shaft
• 6 mm Ball End Hex Key, Journeyman T-Handle, 6″
• 3/16″ Ball Hex Key, Journeyman T-Handle 6″
• Replacement Bits, 1/8″ Slotted and Schrader
• T10 Torx® Hex Key with Journeyman T-Handle, 6″
• High Speed Drill Bit, 21/64″, 118 Degree
• 3/16″ Slotted Power Drivers 1″, 5-Pack
• #1 Phillips Insert Power Driver 1″, 5-Pack
• ‎UR IDC Connectors UR 19-26 AWG
• 7/32″ Hex Key, Journeyman T-Handle, 9″
• Replacement Screw Set (Thumb, Phillips)
• 1/4″ Slotted Power Drivers 1″ Bit 5-Pack
• Cartridge for Twisted Pair Radial Stripper
• #2 Square Insert Power Drivers, 1″, 5-Pack
• High Speed Drill Bit, 5/16″, 118 Degree
• T20 Torx Hex Key with Journeyman T-Handle, 6″
• Blade Set for Modular Crimper/Stripper
• 3/32″ Cabinet Tip Screwdriver, 3″ Shank
• #3 Phillips Insert Power Driver, 1″, 5-Pack
• ‎UY IDC Connectors UY 22-26 AWG, 25-Pack
• T15 Torx® Hex Key with Journeyman T-Handle, 6″
• 3/16″ Hex Key with Journeyman T-Handle, 9″
• 6 mm Hex Key with Journeyman T-Handle, 9″
• Double Sided Combo Replacement Bit, 2-Pack
• #2 Phillips Insert Power Driver, 1″ 5-Pack
• 7/16″ Standard 12-Point Socket, 1/2″ Drive
• 9/16″ Standard 12-Point Socket, 1/2″ Drive
• 1/2″ Standard 12-Point Socket, 1/2″ Drive
• Grip-It® Nine Key Hex Set Square Cut
• Gaff Gauge for Pole and Tree Climbers
• Replacement Blade for Ratcheting Pass-Thru™ Crimper
• Compact Ratcheting Modular Crimper Blade Set
• Replacement Blade Kit for Compact Pass-Thru™ Crimper
• Belt Clip for Impact Wrench and Drill (Cat. Nos. BAT20CW and BAT20CD)
• SCRWDR REPL BIT HLDR 2PC
• 1/4″ Hex Key, Journeyman T-Handle, 4″
• 1/4″ Hex Key, Journeyman T-Handle, 6″
• Replacement Cables for Tone & Probe Test and Trace Kit
• USB Charging Cable, USB-A to USB-C
• Pro Impact Power Bits, Assorted 7-Pack
• L-Style Ball-End Hex Key 3/8″
• Replacement Springs for Pre-2017 Edition Cat. No. 63750
• BIT #2 PHILLIP 1/4 SLOT
• Replacement Spring Kit for Pre-2017 Cable Cutter
• 3/16″ Hex Key with Journeyman T-Handle, 4″
• 7/32″ Hex Key, Journeyman T-Handle, 6″
• 5 mm Hex Key, Journeyman T-Handle 9″
• 7/32″ Hex Key, Journeyman™ T-Handle, 4″
• Heavy Duty Main Barrel Replacement
• 3/16″ Hex Key, Journeyman T-Handle, 6″
• 1/8″ Keystone Tip Screwdriver with Pocket Clip
• 2.5 mm Ball Hex Key Journeyman T-Handle 6″
• High Speed Drill Bit, 9/32″, 118 Degree
• 6 mm Hex Key, Journeyman T-Handle, 6″
• 9/64″ Ball-End Hex Key with T-Handle, 6″
• 1/8″ Pocket Clip Screwdriver 2″ Shaft
• 2 mm Hex Key with Journeyman T-Handle, 6″
• Pocket Clip Screwdriver, 3/32″ Tip, 2″
• Replacement Bit. #1 Phillips, 3/16″ Slotted
• 3 mm Ball End Hex Key, Journeyman T-Handle, 6″
• 4 mm Ball Hex Key Journeyman T-Handle 6″
• BIT FOR #2 PH 3/16″ SLOT
• REPL BIT #2 SQ/#2 PHILLIP
• 7/64″ Ball Hex Key, Journeyman THandle, 6″
• REPL BIT #2 PHIL/#1 PHIL
• REPL BIT #1 SQ 1/4″ SLOT
• PowerLine™ Flashlight Holder
• REPL BT 3/16″ SLOT 1/4″
• 1/8″ Ball Hex Key, Journeyman T-Handle, 6″
• 3/32″ Ball End Hex Key with T-Handle, 6″
• 5 mm Ball Hex Journeyman T-Handle 6″
• 5/32″ Ball Hex Key, Journeyman T-Handle 6″
• Extended Blade Barrel Replacement
• Ratchet Release Plate for Pre-2017 Cat. No. 63060
• Replacement Wheel for Tube Cutter 88904
• REPL BIT 2 PHIL/3/16″ SLT
• T15 S.ARM TORX L-KEY36315
• L-Style Ball-End Hex Key 8 mm
• 5/32″ Hex Key, Journeyman T-Handle, 9″
• 2 mm Hey Key with Journeyman T-Handle, 9″
• 7/64″ Hex Key Journeyman T-Handle 9″
• 1/8″ Hex Key with Journeyman T-Handle, 9″
• ‎10-1/2-Inch Handline with Thong Clip
• 3/32″ Hex Key, Journeyman T-Handle, 9″
• 3 mm Hex Key with Journeyman T-Handle, 9″
• 2.5 mm Hex Key, Journeyman T-Handle, 9″
• Replacement Bit, TORX #6 and #7
• Replacement Bit, Tamperproof TORX #15 and #20
• Replacement Bit, Tamperproof TORX #7 and #8
• Replacement Bit, Tamperproof TORX #9 and #10
• Replacement Bit, Tamperproof TORX #25 and #27
• 7/8″ Standard 12-Point Socket, 3/8″ Drive
• Replacement Bit, TORX #25 and #27
• 4 mm Hex Key, Journeyman T-Handle, 9″
• 13/16″ Standard 12-Point Socket 3/8″ Drive
• REPLBITS 1/8/9/64″ HEX
• Replacement Bit #1 Square & #2 Square
• REPL BIT 3/32″/7/64″ HEX
• REPL BIT 5/32″/3/16″ HEX
• REPL BIT 2.5MM/3MM HEX
• REPL BIT 4MM/5MM HEX
• REPL BIT .9MM/1.3MM HEX
• Replacement Bit, Tamperproof TORX #8 and #10
• Replacement Bit 1.5 mm Hex & 2 mm Hex
• 9/64″ Hex Key, Journeyman T-Handle 9″
• Replacement Bit #10 TORX & #15 TORX
• STUBBY BLADE BARREL REPL
• REPL BIT TAMPRPROOF 10 15
• REPL BIT COMBO TIP #1 #2
• REPL BIT HEX PIN 1/8 9/64
• REPL BIT PHILLIPS #1 #2
• REPL BIT SPANNER 6 AND 8
• REPL BIT SLOTTED 4MM 6MM
• REPL BIT TORX 10 15
• REPL BIT TAMPRPROOF 27 30
• REPL BITSQUARE #1 #2
• REPL BIT TORX 20 25
• REPL BIT PHILLIPS #0 #3
• REPL BIT TAMPRPROOF 20 25
• REPL BIT SPANNER 10 12
• REPL BIT HEXPIN 5/32 3/16
• 5/16″ Hex Key with L-Style Ball End
• TENDO SVL 20 mm, 8 mm × 150 mm Hydraulic Extension
• TENDO RLA HSK-A80, 12 mm × 95 mm Hydraulic Chuck
• TENDO RLA HSK-A80, 20 mm × 105 mm Hydraulic Chuck
• TENDO SVL 20 mm, 10 mm × 150 mm Hydraulic Extension
• TENDO RLA HSK-A80, 10 mm × 90 mm Hydraulic Chuck
• TRIBOS-M - HSK-E25 3.5 mm × 35 mm Polygonal Clamping Holder
• TENDO SVL 20 mm, 16 mm × 150 mm Hydraulic Extension
• 0.375″ Dia. × 0.375″ Shank × 0.5″ DOC × 5″ OAL, ZPLUS, 2 Flute, Ballnose End Mill
• ‎3/4X1-5/8X4 12FL 0.060CR
• ‎1/2X1-5/8X4 6FL TPLUS SQ
• 1/4X3/8X2 6FL 0.020CR
• 3/4X1X5 3FL SQ_EM
• ‎3/8X1-1/2X3-1/2 3FL .010R
• 0.375″ Dia. × 0.375″ Shank × 0.5″ DOC × 5″ OAL, UN, 2 Flute, Ballnose End Mill
• 3/4X1X5 3FL 0.060CR EM
• 0.3125″ Dia. × 0.3125″ Shank × 0.4375″ DOC × 2″ OAL, UN, 3 Flute, Ballnose End Mill
• 0.5″ Dia. × 0.5″ Shank × 0.625″ DOC × 4″ OAL, UN, 2 Flute, Ballnose End Mill
• 3/8X1/2X2 3FL 0.010CR Z
• 3/4X2 3/4X5 3FL SQ EM
• 3/8X1/2X2 3FL 0.010CR EM
• ‎3/8X1X2-1/2 3FL 0.010CR
• 0.3125″ Dia. × 0.3125″ Shank × 0.75″ DOC × 2.5″ OAL, UN, 3 Flute, Ballnose End Mill
• 0.3125″ Dia. × 0.3125″ Shank × 0.4375″ DOC × 2″ OAL, ZPLUS, 3 Flute, Ballnose End Mill
• 0.02″ Cutting Dia. × 3/16″ Shank Size × 0.14″ LOC × 3″ OAL, 4 Flute, Carbide, Ball Nose End Mill
• ‎0.031″ Dia. × 0.0465″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 Flute, Carbide, AlTiN, Square End Mill
• ‎0.093″ Dia. × 0.1395″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 Flute, Carbide, AlTiN, Square End Mill
• ‎0.078″ Dia. × 0.117″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 Flute, Carbide, AlTiN, Square End Mill
• ‎0.03″ Dia. × 0.045″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 Flute, Carbide, AlTiN, Square End Mill
• ‎0.031″ Dia. × 0.0465″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 Flute, Carbide, Square End Mill
• ‎0.02″ Dia. × 0.03″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 Flute, Carbide, Square End Mill
• ‎0.03″ Dia. × 0.045″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 Flute, Carbide, Square End Mill
• ‎0.035″ Dia. × 0.0525″ LOC × 1/8″ Shank Dia. × 2-1/2″ OAL, 3 Flute, Carbide, Square End Mill
• SF-7NF ALUMA BURR
• 2PLY 2″X8' FLAT EYE PGE
• ‎Corner Radius End Mill; 0.02″ Radius × 3/8″ Dia. × 1″ LOC × 3/8″ Shank Dia. × 2-1/2″ OAL, 5 Flutes, Carbide, AlTiN
• 0.437″ Diameter × 80 Grit, 4 1/2″ OAL, Silicon Carbide, 85 AY-Abrasive Nylon Brush
• 1″ Diameter × 120 Grit, 6″ OAL, Silicon Carbide, 85 AY-Abrasive Nylon Brush
• 1″ Diameter × 18″ OAL, Nylon, Automotive Brushes
• 6 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 400 Grit, Boron Carbide - Chamfer Flex-Hone
• 6 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 400 Grit, Aluminum Oxide - Standard Duty Flex-Hone
• 6 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 320 Grit, Silicon Carbide - Standard Duty Flex-Hone
• 6 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 400 Grit, Boron Carbide - Chamfer Flex-Hone
• 6 mm Bore Diameter × 1 1/2″ Hone Length × 8″ Overall Length, 400 Grit, Boron Carbide - Chamfer Flex-Hone
• ‎MH-10/12-35 HLDR FOR 35MM
• ‎1/2-13 BGF-Z Style Thread Mill
• ‎1/2-13 GSF Style Spiral Flute Thread Mill
• ‎10-32 UNF 2B IF1-GAL-SN TICN
• Chamfer End Mill; 20 mm Dia. × 38 mm LOC × 20 mm Shank Dia. × 104 mm OAL ; 3 FL ; Carbide ; Bright ; Series 2545
• ‎M 56X4-6HX ROBUST 2X-VA
• ‎M 56X3-6HX ROBUST 2X-VA
• ‎M3.5x0.6 - 4h Ring Gage - Go
• ‎Square End Mill; 1/2″ Dia. × 1/2″ Shank Dia. × 3-1/4″ OAL ; 12 FL ; Carbide ; AlTiN ; Series 2887A
• Torus End Mill; 1 mm Dia. × 0.8 mm LOC × 4 mm Shank Dia. × 50 mm OAL ; 3 FL ; Carbide ; Bright ; Series 2640
• Torus End Mill; 1 mm Dia. × 1 mm LOC × 6 mm Shank Dia. × 80 mm OAL ; 2 FL ; Carbide ; AlCr ; 0.2 mm R ; Series Micro
• 2.35 mm Dia. × 3 mm Shank Dia. × 50 mm OAL × 16.5 mm LCF, 140 Degrees, 7xD, 2 Flute, Uncoated - Solid Carbide Drills
• 2.35 mm Dia. × 3 mm Shank Dia. × 70 mm OAL × 40 mm LCF, 140 Degrees, 15xD, 2 Flute, TiAlN - Solid Carbide Drills
• 2.37 mm Dia. × 2.5 mm Shank Dia. × 35 mm OAL × 14 mm Flute Length, 120 Degrees, 2 Flute, HSS-E, Micro Drill
• 2.36 mm Dia. × 2.5 mm Shank Dia. × 35 mm OAL × 14 mm Flute Length, 120 Degrees, 2 Flute, HSS-E, Micro Drill
• 2.35 mm Dia. × 3 mm Shank Dia. × 70 mm OAL × 40 mm LCF, 140 Degrees, 15xD, 2 Flute, Uncoated - Solid Carbide Drills
• ‎0.008″ Cutting Dia. × 1/8″ Shank Size × 0.024″ LOC × 1-1/2″ OAL, 2 Flute, Carbide, Amorphous Diamond, Square End Mill
• ‎0.008″ Cutting Dia. × 1/8″ Shank Size × 0.024″ LOC × 1-1/2″ OAL, 2 Flute, Carbide, Uncoated, Square End Mill
• ‎0.008″ Cutting Dia. × 1/8″ Shank Size × 0.024″ LOC × 1-1/2″ OAL, 4 Flute, Carbide, Uncoated, Square End Mill
• ‎0.02″ Dia. × 0.03″ LOC × 1/8″ Shank Size × 2-1/2″ OAL, 4 Flute, Carbide, TiAlN, Ballnose Endmill
• ‎0.03″ Dia. × 0.24″ LOC × 1/4″ Shank Size × 2-1/2″ OAL, 3 Flute, 20 Degrees Body Half Taper Angle, Carbide, AlTiN Nano, Square, Tapered End Mill
• ‎0.04″ Cutting Dia. × 1/8″ Shank Size × 13/64″ LOC × 2-1/2″ OAL, 4 Flute, Carbide, AlTiN Nano, Square End Mill
• ‎0.04″ Dia. × 1-1/2″ OAL, 140 Degrees, Carbide, AlTiN, Miniature Drills - Spotting Drills
• 3/16″ Cutting Dia. × 3/16″ Shank Size × 0.563″ LOC × 2″ OAL, 2 Flute, Carbide, Uncoated, Square End Mill
• 3/16″ Cutting Dia. × 3/16″ Shank Size × 0.563″ LOC × 2″ OAL, 3 Flute, Carbide, Amorphous Diamond, 0.03″ Corner Radius End Mill
• 3/16″ Cutting Dia. × 3/16″ Shank Size × 0.563″ LOC × 2″ OAL, 3 Flute, Carbide, TiB2, Square End Mill
• 3/16″ Cutting Dia. × 3/16″ Shank Size × 0.563″ LOC × 2″ OAL, 4 Flute, Carbide, AlTiN, 0.01″ Corner Radius End Mill
• 3/16″ Cutting Dia. × 3/16″ Shank Size × 0.563″ LOC × 2″ OAL, 3 Flute, Carbide, Uncoated, Square End Mill
• 3/16″ Cutting Dia. × 3/16″ Shank Size × 0.563″ LOC × 2″ OAL, 4 Flute, Carbide, Uncoated, 0.01″ Corner Radius End Mill
• 3/16″ Cutting Dia. × 3/16″ Shank Size × 0.563″ LOC × 2″ OAL, 9 Flute, Carbide, Amorphous Diamond, Square End Mill
• ‎3/32″ Cutting Dia. × 1/8″ Shank Size × 9/64″ LOC × 1-1/2″ OAL, 6 Flute, Carbide, Amorphous Diamond, Square End Mill
• ‎Keyseat Cutter, 3/16″ Dia. × 3/16″ Shank Dia. × 0.095″ CW × 2-1/2″ OAL, 6 Teeth, 90 Degrees, Carbide, Round Shank, Uncoated, Specialty Profiles
• ‎1/8X1/4X1-1/2 5FL 0.030CR
• ‎1/8X3/4X2-1/2 3FL ZPLUS_
• ‎1/8X1/4X1-1/2 5FL 0.015CR
• ‎H40ALV-L-30375-R.060 ZPLUS COATED
• HSF-S-70437 APLUS COATED
• HSF-S-71000 APLUS COATED
• HSF-SR-70250 APLUS COATED
• HSF-S-70375 APLUS COATED
• HSF-S-70500 APLUS COATED
• HSF-SR-70375 APLUS COATED
• HSF-S-70750 APLUS COATED
• HSF-X-70250 APLUS COATED
• HSF-X-70312 APLUS COATED
• HSV-SR-40375-R.060 APLUS COATED
• HXF-S-120750-R.060 APLUS COATED
• IHP 0496 IC948
• Soft Jaw; 3″ Length; 7.95″ Width; 1.45″ Height; Number of Pieces: 1
• #39 Dia. × 0.1575″ Shank × 0.9843″ Usable Length × 2.5984″ OAL, 8xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
• ‎3/64″ Cutting Dia. × 1/8″ Shank Size × 9/64″ LOC × 1-1/2″ OAL, 4 Flute, Carbide, AlTiN, Ball Nose End Mill
• ‎3/8″ Dia. × 1-1/4″ LOC × 3/8″ Shank Dia. × 2-1/2″ OAL, 4 Flute, Carbide, AlCrN, Corner Radius End Mill
• 8.7 mm Dia. × 10 mm Shank × 35 mm Usable Length × 89 mm OAL, 3xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill
• 9.5 mm Dia. × 10 mm Shank × 49 mm Usable Length × 103 mm OAL, 5xD, 140 Degree, AlTiN, 2 Flute, Coolant Through, HP Patriot Solid Carbide Drill