Threading > Taps (ET04) - (100626 Products)
Threading > Taps (ET04)
M 12-7G 2ENORM-VA
Item #: ER45C0503
Brand: EMUGE-FRANKEN
Model #: C0503030.0112
$101.86
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Roughing & Finishing End Mills; Mill Diameter (Fractional Inch): 3/4; Flute Type: Spiral; Number Of Flutes: 5; End Mill Material: Solid Carbide; Length of Cut (Inch): 1; Coating/Finish: AlCr
Item #: 48590772
Brand: Emuge
Model #: 3920L.0750
Product Specifications
| Mill Diameter (Fractional Inch) | 3/4 |
| Flute Type | Spiral |
| Number Of Flutes | 5 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 1 |
| Coating/Finish | AlCr |
| Centercutting | No |
| End Type | Single End |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Shank Diameter (Inch) | 3/4 |
| Shank Type | Straight |
| Length Type | Stub |
| Coolant Through | No |
| Variable Helix | Yes |
| Variable Index | Yes |
| Helix Angle | 35/38 |
| Shank Diameter Tolerance | h6 |
| UNSPSC Code | 27112803 |
$246.42
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: JAZ USA / Part #: 11320
Item #: 76820877
Brand: JAZ USA
Model #: 11320
Product Specifications
| Brush Diameter (Decimal Inch) | 1 |
| Filament/Wire Diameter (Decimal Inch) | 0.0080 |
| Fill Material | Brass-Coated Steel |
| Wire Type | Crimped |
| Trim Length (Inch) | 1/2 |
| Shank Diameter (Decimal Inch) | 1/4 |
| Maximum Rpm | 25000.000 |
| Overall Length (Inch) | 2-1/2 |
| Shank Length (Inch) | 7/8 |
| Shank Material | Steel |
| Shank Included | Yes |
| Piloted | No |
| Abrasive Material | Brass |
| Flared | Yes |
| Grade | Fine |
$18.89
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Extra Length Drill Bit: 0.1732", 140 °, Carbide
Item #: 04973848
Brand: Mitsubishi
Model #: 555170
Product Specifications
| Drill Bit Size (mm) | 4.40 |
| Overall Length (mm) | 82.8000 |
| Tool Material | Carbide |
| Coating/Finish | TiAlN |
| Coolant Through | Yes |
| Flute Type | Helical |
| Shank Type | Cylindrical |
| Drill Point Angle | 140 |
| Flute Length (mm) | 33.80 |
| Point Type | X-Thinning |
| Series | MMS |
| Cutting Direction | Right Hand |
| Tool Application | Drilling; Cross Hole; Stack Drilling |
| Spiral Type | Right Hand |
| Number Of Flutes | 2 |
| Web Thinning | X-Thinned |
| Web Configuration | Parallel |
| Primary Workpiece Material | Stainless Steel |
| Primary Workpiece Material Code | M |
| Secondary Workpiece Material | Stainless Steel |
| Secondary Workpiece Material Code | M |
| Drill Bit Grade | High Precision; High Performance |
| Drill Bit Size (Decimal Inch) | 0.1732 |
| Drill Point Length (mm) | 0.80 |
| Drill Point Length (Decimal Inch) | 0.0315 |
| Overall Length (Decimal Inch) | 3.2598 |
| Shank Diameter (Decimal Inch) | 0.2362 |
| Shank Diameter (mm) | 6.0000 |
| Shank Length (Decimal Inch) | 1.8504 |
| Shank Length (mm) | 47.000 |
| Flute Length (Decimal Inch) | 1.3307 |
| Flute By Diameter Ratio | 5xD |
| Maximum Drilling Depth (Decimal Inch) | 0.8976 |
| Maximum Drilling Depth (mm) | 22.80 |
| Specification Designation | ISO |
| UNSPSC Code | 23241637 |
$167.82
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 5576346
Item #: 13869862
Brand: Widia
Model #: 5576346
Product Specifications
| Mill Diameter (Inch) | 1/8 |
| Mill Diameter (Decimal Inch) | 0.1250 |
| Number Of Flutes | 4 |
| Length of Cut (Inch) | 1/2 |
| End Mill Material | Solid Carbide |
| End Type | Single |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Shank Diameter (Inch) | 1/8 |
| Finish/Coating | AlTiN |
| Overall Length (Inch) | 2 |
| Helix Angle | 38 |
| Chipbreaker | No |
| Variable Helix | No |
| Variable Index | Yes |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Length of Cut (Decimal Inch) | 0.5000 |
| Material Grade | WP15PE |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Overall Length (Decimal Inch) | 2.0000 |
| Flute Direction | Right Hand |
| Flute Type | Variable Index |
| Helix Style | Medium |
| Length Type | Regular |
| Reach Length (Decimal Inch) | 0.5000 |
| Reach Length (mm) | 12.70 |
| Through Coolant | No |
| Series | 4V05 |
$23.38
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Ingersoll Cutting Tools / Part #: 5901950
Item #: 18967224
Brand: Ingersoll Cutting Tools
Model #: 5901950
Product Specifications
| Insert Style | 16ER |
| Insert Size Code | 16 |
| Insert Material | Carbide |
| Manufacturer Grade | TT9030 |
| Thread Type | External |
| Pitch (mm) | 0.50-3.00 |
| Thread Standard | Partial Profile 60 Degree |
| Insert Hand | Right Hand |
| Included Angle | 55.00 |
| Chipbreaker | None |
| Series | Partial Profile B-Type |
| Coating Process | PVD |
| Inscribed Circle (Inch) | 3/8 |
| Corner Radius (Decimal Inch) | 0.0020 |
| Rake | Positive |
| Primary Workpiece Material | Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; K; M |
| Secondary Workpiece Material | Hard Material; Non-Ferrous Metal; Super-alloys & Titanium |
| Secondary Workpiece Material Code | S; H; N |
| Ansi Code | 16ERAG55 |
| Iso Code | 16ERAG55 |
| Cutting Edge to Theoretical Edge Length (Decimal Inch) | 0.067 |
| Face of Insert to Tip Centerline (Decimal Inch) | 0.047 |
| Number of Teeth Per Side | 1 |
| Cutting Direction | Right Hand |
| Coating Classification | PVD |
| Thickness (Decimal Inch - 4 Decimals) | 0.1430 |
| Coating/Finish | TiAlN |
$23.51
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Ingersoll Cutting Tools / Part #: 5901966
Item #: 06609093
Brand: Ingersoll Cutting Tools
Model #: 5901966
Product Specifications
| Insert Style | 16ER |
| Insert Size Code | 16 |
| Insert Material | Carbide |
| Manufacturer Grade | TT9030 |
| Thread Type | External |
| Pitch (mm) | 1.06 |
| Thread Standard | UN 60 Degree |
| Insert Hand | Right Hand |
| Included Angle | 60.00 |
| Chipbreaker | None |
| Series | American UN Regular Type |
| Coating Process | PVD |
| Inscribed Circle (Inch) | 3/8 |
| Corner Radius (Decimal Inch) | 0.0050 |
| Rake | Positive |
| Primary Workpiece Material | Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; K; M |
| Secondary Workpiece Material | Hard Material; Non-Ferrous Metal; Super-alloys & Titanium |
| Secondary Workpiece Material Code | S; H; N |
| Ansi Code | 16ER24UN |
| Iso Code | 16ER24UN |
| Cutting Edge to Theoretical Edge Length (Decimal Inch) | 0.031 |
| Face of Insert to Tip Centerline (Decimal Inch) | 0.028 |
| Number of Teeth Per Side | 1 |
| Cutting Direction | Right Hand |
| Coating Classification | PVD |
| Thickness (Decimal Inch - 4 Decimals) | 0.1430 |
| Coating/Finish | TiAlN |
$23.51
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Spiral Flute Tap: 3/8-16 UNC, 3 Flutes, Plug, 3B Class of Fit, Powdered Metal, Nitride/Oxide Coated
Item #: 97342901
Brand: Widia
Model #: 5705057
Product Specifications
| Thread Size (Inch) | 3/8-16 |
| Thread Standard | UNC |
| Chamfer | Plug |
| Material | Powdered Metal |
| Thread Limit | H3 |
| Class Of Fit | 3B |
| Coating/Finish | Oxide |
| Thread Direction | Right Hand |
| Coolant Through | No |
| Number Of Flutes | 3 |
| Material Application | High-Temperature Alloy |
| Flute Direction | Left Hand |
| Proprietary Coating/Finish | Nitride;Oxide |
| Primary Workpiece Material | High-Temp Alloy |
| Threads per Inch | 16 |
| Thread Length (Decimal Inch) | 0.6000 |
| Overall Length (Decimal Inch) | 2.9500 |
| Thread Pitch (Decimal Inch) | 0.0625 |
| Material Grade | WS39MG |
| Primary Workpiece Material Code | S |
| Shank Diameter (Decimal Inch) | 0.3810 |
| Tapping Depth (Decimal Inch) | 1.2800 |
| Square Size (Decimal Inch) | 0.2840 |
| Series | GT90 |
| UNSPSC Code | 23241600 |
| Country of Origin | UNITED STATES |
$28.75
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Spiral Flute Tap: 1/4-20 UNC, 3 Flutes, Modified Bottoming, 2B Class of Fit, Powdered Metal, Hardslick Coated
Item #: 91832451
Brand: YG-1
Model #: H8405
Product Specifications
| Thread Size (Inch) | 1/4-20 |
| Thread Standard | UNC |
| Chamfer | Modified Bottoming |
| Material | Powdered Metal |
| Thread Limit | H5 |
| Class Of Fit | 2B |
| Coating/Finish | Hardslick |
| Thread Direction | Right Hand |
| Coolant Through | No |
| Number Of Flutes | 3 |
| Material Application | Steel |
| Flute Direction | Right Hand |
| Helix Angle | 10 |
| Proprietary Coating/Finish | Hardslick |
| Oversize | No |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P |
| Flute Style | Slow |
| UNSPSC Code | 23241600 |
| Country of Origin | South Korea |
$28.96
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Spiral Flute Tap: 3/8-16 UNC, 3 Flutes, Modified Bottoming, 2B Class of Fit, Powdered Metal, Hardslick Coated
Item #: 91832477
Brand: YG-1
Model #: H8485
Product Specifications
| Thread Size (Inch) | 3/8-16 |
| Thread Standard | UNC |
| Chamfer | Modified Bottoming |
| Material | Powdered Metal |
| Thread Limit | H5 |
| Class Of Fit | 2B |
| Coating/Finish | Hardslick |
| Thread Direction | Right Hand |
| Coolant Through | No |
| Number Of Flutes | 3 |
| Material Application | Steel |
| Flute Direction | Right Hand |
| Helix Angle | 10 |
| Proprietary Coating/Finish | Hardslick |
| Oversize | No |
| Primary Workpiece Material | Steel |
| Primary Workpiece Material Code | P |
| Flute Style | Slow |
| UNSPSC Code | 23241600 |
| Country of Origin | South Korea |
$41.59
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Spiral Flute Tap: 3/8-16, UNC, 3 Flute, Modified Bottoming Chamfer, 3B Class of Fit, Cobalt, TiCN Finish
Item #: 91282822
Brand: YG-1
Model #: T2483C
Product Specifications
| Thread Size (Inch) | 3/8-16 |
| Thread Standard | UNC |
| Chamfer | Modified Bottoming |
| Material | Cobalt |
| Thread Limit | H3 |
| Class Of Fit | 3B |
| Coating/Finish | TiCN |
| Thread Direction | Right Hand |
| Coolant Through | No |
| Number Of Flutes | 3 |
| Material Application | K, M, N, P |
| Flute Direction | Right Hand |
| Helix Angle | 40 |
| Proprietary Coating/Finish | TiCN |
| Oversize | No |
| Primary Workpiece Material | Aluminum & Non-Ferrous; Stainless Steel; Cast Iron; Steel |
| Threads per Inch | 16 |
| Overall Length (Inch) | 2-47/50 |
| Thread Length (Decimal Inch) | 0.5510 |
| Thread Length (Inch) | 27/49 |
| Overall Length (Decimal Inch) | 2.9400 |
| Overall Length (mm) | 74.68 |
| Thread Pitch (Decimal Inch) | 0.0625 |
| Thread Pitch (mm) | 1.5875 |
| Thread Pitch (Inch) | 1/16 |
| Primary Workpiece Material Code | P; K; M; N |
| Shank Diameter (Decimal Inch) | 0.3810 |
| Shank Diameter (mm) | 9.68 |
| Neck Length (mm) | 7.29 |
| Neck Length (Inch) | 2/7 |
| Neck Length (Decimal Inch) | 0.2870 |
| Tapping Depth (Decimal Inch) | 0.9375 |
| Tapping Depth (mm) | 23.81 |
| Tapping Depth (Fractional Inch) | 15/16 |
| Square Length (mm) | 11.18 |
| Square Length (Inch) | 11/25 |
| Square Length (Decimal Inch) | 0.4400 |
| Square Size (Decimal Inch) | 0.2860 |
| Square Size (mm) | 7.26 |
| Flute Style | Spiral |
| Series | T2-C |
| Shank Length (mm) | 9.68 |
| Shank Length (Decimal Inch) | 0.3810 |
| UNSPSC Code | 23241600 |
| Country of Origin | South Korea |
$26.36
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Straight Flute Tap: #1-72 UNF, 2 Flute, Plug Chamfer, HSS, Bright/Uncoated Finish
Item #: 85603819
Brand: Gyros Precision Tools
Model #: 91-10172
Product Specifications
| Tap Type | Standard |
| Thread Size (Inch) | #1-72 |
| Thread Standard | UNF |
| Chamfer | Plug |
| Material | High-Speed Steel |
| Coating/Finish | Bright/Uncoated |
| Thread Direction | Right Hand |
| Coolant Through | No |
| Number Of Flutes | 2 |
| Oversize | No |
| Overall Length (Inch) | 1-11/16 |
| Material Application | Low-Carbon Steel; Aluminum; Stainless Steel; Brass; Plastic; Copper |
| UNSPSC Code | 23241600 |
$5.69
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Straight Flute Tap: M7x1 Metric Coarse, 4 Flute, Bottoming Chamfer, HSS, Bright/Uncoated Finish
Item #: 71355184
Brand: Cleveland
Model #: C54491
Product Specifications
| Tap Type | Standard |
| Thread Size (mm) | M7x1 |
| Thread Standard | Metric Coarse |
| Chamfer | Bottoming |
| Material | High-Speed Steel |
| Coating/Finish | Bright/Uncoated |
| Thread Direction | Right Hand |
| Coolant Through | No |
| Thread Limit | D5 |
| Number Of Flutes | 4 |
| Oversize | No |
| Overall Length (Decimal Inch) | 2.7189 |
| Overall Length (mm) | 69.06 |
| Thread Length (Decimal Inch) | 0.6900 |
| Thread Length (mm) | 28.58 |
| Shank Diameter (mm) | 8.08 |
| Shank Diameter (Decimal Inch) | 0.3181 |
| Square Size (mm) | 6.05 |
| Square Size (Decimal Inch) | 0.2382 |
| Series | 1003 |
| UNSPSC Code | 23241600 |
| Tap Type | Standard |
| Thread Size (mm) | M7x1 |
| Thread Standard | Metric Coarse |
| Chamfer | Bottoming |
| Material | High-Speed Steel |
| Coating/Finish | Bright/Uncoated |
| Thread Direction | Right Hand |
| Coolant Through | No |
| Thread Limit | D5 |
| Number Of Flutes | 4 |
| Oversize | No |
| Overall Length (Decimal Inch) | 2.7189 |
| Overall Length (mm) | 69.06 |
| Thread Length (Decimal Inch) | 0.6900 |
| Thread Length (mm) | 28.58 |
| Shank Diameter (mm) | 8.08 |
| Shank Diameter (Decimal Inch) | 0.3181 |
| Square Size (mm) | 6.05 |
| Square Size (Decimal Inch) | 0.2382 |
| Series | 1003 |
| UNSPSC Code | 23241600 |
| MSC Part # | 71355184 |
| Mfr Part # | C54491 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$15.39
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Spiral Flute Tap:
Item #: 66862491
Brand: YMW Taps USA
Model #: 384652
Product Specifications
| Chamfer | Bottoming |
| Material | High-Speed Steel |
| Coating/Finish | Oxide |
| Thread Direction | Right Hand |
| Coolant Through | No |
| UNSPSC Code | 23241600 |
| Chamfer | Bottoming |
| Material | High-Speed Steel |
| Coating/Finish | Oxide |
| Thread Direction | Right Hand |
| Coolant Through | No |
| UNSPSC Code | 23241600 |
| MSC Part # | 66862491 |
| Mfr Part # | 384652 |
| Country of Origin Country of Origin is subject to change | Japan |
$45.03
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Spiral Flute Tap: UNC, 3 Flute, Modified Bottoming, 2B & 3B Class of Fit, Cobalt, Ignator Finish
Item #: 64168388
Brand: Guhring
Model #: 9048813041660
Product Specifications
| Thread Size (Inch) | #8-32 |
| Thread Standard | UNC |
| Chamfer | Modified Bottoming |
| Material | Cobalt |
| Thread Limit | H3 |
| Class Of Fit | 2B/3B |
| Coating/Finish | Proprietary |
| Thread Direction | Right Hand |
| Coolant Through | No |
| Number Of Flutes | 3 |
| Material Application | Ductile Iron; Malleable Cast Iron; Alloy Steel; Stainless Steel; Cast Iron; Case-Hardened Steel; Free-Cutting Steel; Structural Steel; Tool Steel; Aluminum Alloy; Heat-Treated Steel; Alloy Tool Steel |
| Flute Direction | Right Hand |
| Helix Angle | 40 |
| Proprietary Coating/Finish | Ignator |
| Oversize | No |
| Primary Workpiece Material | Aluminum & Non-Ferrous; Stainless Steel; Cast Iron; Steel |
| Threads per Inch | 32 |
| Thread Length (Decimal Inch) | 0.3140 |
| Overall Length (Decimal Inch) | 2.1300 |
| Thread Pitch (Decimal Inch) | 0.0313 |
| Primary Workpiece Material Code | P; K; M; N |
| Application | Blind Hole Threading |
| Shank Diameter (Decimal Inch) | 0.1680 |
| Neck Length (Decimal Inch) | 0.5130 |
| Tapping Depth (Decimal Inch) | 0.8270 |
| Square Size (Decimal Inch) | 0.1310 |
| Flute Style | Fast |
| Series | 4881 |
| UNSPSC Code | 23241600 |
| Thread Size (Inch) | #8-32 |
| Thread Standard | UNC |
| Chamfer | Modified Bottoming |
| Material | Cobalt |
| Thread Limit | H3 |
| Class Of Fit | 2B/3B |
| Coating/Finish | Proprietary |
| Thread Direction | Right Hand |
| Coolant Through | No |
| Number Of Flutes | 3 |
| Material Application | Ductile Iron; Malleable Cast Iron; Alloy Steel; Stainless Steel; Cast Iron; Case-Hardened Steel; Free-Cutting Steel; Structural Steel; Tool Steel; Aluminum Alloy; Heat-Treated Steel; Alloy Tool Steel |
| Flute Direction | Right Hand |
| Helix Angle | 40 |
| Proprietary Coating/Finish | Ignator |
| Oversize | No |
| Primary Workpiece Material | Aluminum & Non-Ferrous; Stainless Steel; Cast Iron; Steel |
| Threads per Inch | 32 |
| Thread Length (Decimal Inch) | 0.3140 |
| Overall Length (Decimal Inch) | 2.1300 |
| Thread Pitch (Decimal Inch) | 0.0313 |
| Primary Workpiece Material Code | P; K; M; N |
| Application | Blind Hole Threading |
| Shank Diameter (Decimal Inch) | 0.1680 |
| Neck Length (Decimal Inch) | 0.5130 |
| Tapping Depth (Decimal Inch) | 0.8270 |
| Square Size (Decimal Inch) | 0.1310 |
| Flute Style | Fast |
| Series | 4881 |
| UNSPSC Code | 23241600 |
| MSC Part # | 64168388 |
| Mfr Part # | 9048813041660 |
| Country of Origin Country of Origin is subject to change | Germany |
$17.16
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Straight Flute Tap: MF20x1.5 Metric Fine, 3 Flute, Semi-Bottoming Chamfer, 6HX Class of Fit, HSS-E, TiN Finish
Item #: 59344325
Brand: Walter-Prototyp
Model #: 8237486
Product Specifications
| Tap Type | Straight Flute |
| Thread Size (mm) | MF20x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | TiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 3 |
| Oversize | No |
| Overall Length (Decimal Inch) | 4.9213 |
| Overall Length (mm) | 125.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 0.9449 |
| Thread Length (mm) | 24.00 |
| Application | Threading |
| Shank Diameter (mm) | 16.0000 |
| Shank Diameter (Decimal Inch) | 0.6299 |
| Tapping Depth (mm) | 24.00 |
| Tapping Depth (Decimal Inch) | 0.9449 |
| Square Length (mm) | 15.00 |
| Square Length (Decimal Inch) | 0.5906 |
| Square Size (mm) | 12.00 |
| Square Size (Decimal Inch) | 0.4724 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| Tap Type | Straight Flute |
| Thread Size (mm) | MF20x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | TiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 3 |
| Oversize | No |
| Overall Length (Decimal Inch) | 4.9213 |
| Overall Length (mm) | 125.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 0.9449 |
| Thread Length (mm) | 24.00 |
| Application | Threading |
| Shank Diameter (mm) | 16.0000 |
| Shank Diameter (Decimal Inch) | 0.6299 |
| Tapping Depth (mm) | 24.00 |
| Tapping Depth (Decimal Inch) | 0.9449 |
| Square Length (mm) | 15.00 |
| Square Length (Decimal Inch) | 0.5906 |
| Square Size (mm) | 12.00 |
| Square Size (Decimal Inch) | 0.4724 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| MSC Part # | 59344325 |
| Mfr Part # | 8237486 |
| Country of Origin Country of Origin is subject to change | Germany |
$214.83
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Straight Flute Tap: MF24x1.5 Metric Fine, 4 Flute, Semi-Bottoming Chamfer, 6HX Class of Fit, HSS-E, TiN Finish
Item #: 59344341
Brand: Walter-Prototyp
Model #: 8237488
Product Specifications
| Tap Type | Straight Flute |
| Thread Size (mm) | MF24x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | TiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 4 |
| Oversize | No |
| Overall Length (Decimal Inch) | 5.5118 |
| Overall Length (mm) | 140.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 1.0236 |
| Thread Length (mm) | 26.00 |
| Application | Threading |
| Shank Diameter (mm) | 18.0000 |
| Shank Diameter (Decimal Inch) | 0.7087 |
| Tapping Depth (mm) | 26.00 |
| Tapping Depth (Decimal Inch) | 1.0236 |
| Square Length (mm) | 17.00 |
| Square Length (Decimal Inch) | 0.6693 |
| Square Size (mm) | 14.50 |
| Square Size (Decimal Inch) | 0.5709 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| Tap Type | Straight Flute |
| Thread Size (mm) | MF24x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | TiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 4 |
| Oversize | No |
| Overall Length (Decimal Inch) | 5.5118 |
| Overall Length (mm) | 140.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 1.0236 |
| Thread Length (mm) | 26.00 |
| Application | Threading |
| Shank Diameter (mm) | 18.0000 |
| Shank Diameter (Decimal Inch) | 0.7087 |
| Tapping Depth (mm) | 26.00 |
| Tapping Depth (Decimal Inch) | 1.0236 |
| Square Length (mm) | 17.00 |
| Square Length (Decimal Inch) | 0.6693 |
| Square Size (mm) | 14.50 |
| Square Size (Decimal Inch) | 0.5709 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| MSC Part # | 59344341 |
| Mfr Part # | 8237488 |
| Country of Origin Country of Origin is subject to change | Germany |
$300.96
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Straight Flute Tap: MF16x1.5 Metric Fine, 3 Flute, Semi-Bottoming Chamfer, 6HX Class of Fit, HSS-E, TiN Finish
Item #: 59343863
Brand: Walter-Prototyp
Model #: 8237484
Product Specifications
| Tap Type | Straight Flute |
| Thread Size (mm) | MF16x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | TiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 3 |
| Oversize | No |
| Overall Length (Decimal Inch) | 3.9370 |
| Overall Length (mm) | 100.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 0.8268 |
| Thread Length (mm) | 21.00 |
| Application | Threading |
| Shank Diameter (mm) | 12.0000 |
| Shank Diameter (Decimal Inch) | 0.4724 |
| Tapping Depth (mm) | 21.00 |
| Tapping Depth (Decimal Inch) | 0.8268 |
| Square Length (mm) | 12.00 |
| Square Length (Decimal Inch) | 0.4724 |
| Square Size (mm) | 9.00 |
| Square Size (Decimal Inch) | 0.3543 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| Tap Type | Straight Flute |
| Thread Size (mm) | MF16x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | TiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 3 |
| Oversize | No |
| Overall Length (Decimal Inch) | 3.9370 |
| Overall Length (mm) | 100.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 0.8268 |
| Thread Length (mm) | 21.00 |
| Application | Threading |
| Shank Diameter (mm) | 12.0000 |
| Shank Diameter (Decimal Inch) | 0.4724 |
| Tapping Depth (mm) | 21.00 |
| Tapping Depth (Decimal Inch) | 0.8268 |
| Square Length (mm) | 12.00 |
| Square Length (Decimal Inch) | 0.4724 |
| Square Size (mm) | 9.00 |
| Square Size (Decimal Inch) | 0.3543 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| MSC Part # | 59343863 |
| Mfr Part # | 8237484 |
| Country of Origin Country of Origin is subject to change | Germany |
$161.37
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Straight Flute Tap: MF22x1.5 Metric Fine, 3 Flute, Semi-Bottoming Chamfer, 6HX Class of Fit, HSS-E, AlCrTiN Finish
Item #: 59343616
Brand: Walter-Prototyp
Model #: 8128458
Product Specifications
| Tap Type | Straight Flute |
| Thread Size (mm) | MF22x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | AlCrTiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 3 |
| Oversize | No |
| Overall Length (Decimal Inch) | 4.9213 |
| Overall Length (mm) | 125.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 0.9449 |
| Thread Length (mm) | 24.00 |
| Application | Threading |
| Shank Diameter (mm) | 18.0000 |
| Shank Diameter (Decimal Inch) | 0.7087 |
| Tapping Depth (mm) | 24.00 |
| Tapping Depth (Decimal Inch) | 0.9449 |
| Square Length (mm) | 17.00 |
| Square Length (Decimal Inch) | 0.6693 |
| Square Size (mm) | 14.50 |
| Square Size (Decimal Inch) | 0.5709 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| Tap Type | Straight Flute |
| Thread Size (mm) | MF22x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | AlCrTiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 3 |
| Oversize | No |
| Overall Length (Decimal Inch) | 4.9213 |
| Overall Length (mm) | 125.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 0.9449 |
| Thread Length (mm) | 24.00 |
| Application | Threading |
| Shank Diameter (mm) | 18.0000 |
| Shank Diameter (Decimal Inch) | 0.7087 |
| Tapping Depth (mm) | 24.00 |
| Tapping Depth (Decimal Inch) | 0.9449 |
| Square Length (mm) | 17.00 |
| Square Length (Decimal Inch) | 0.6693 |
| Square Size (mm) | 14.50 |
| Square Size (Decimal Inch) | 0.5709 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| MSC Part # | 59343616 |
| Mfr Part # | 8128458 |
| Country of Origin Country of Origin is subject to change | Germany |
$283.14
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Straight Flute Tap: MF14x1.5 Metric Fine, 3 Flute, Semi-Bottoming Chamfer, 6HX Class of Fit, HSS-E, TiN Finish
Item #: 59343830
Brand: Walter-Prototyp
Model #: 8237483
Product Specifications
| Tap Type | Straight Flute |
| Thread Size (mm) | MF14x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | TiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 3 |
| Oversize | No |
| Overall Length (Decimal Inch) | 3.9370 |
| Overall Length (mm) | 100.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 0.8268 |
| Thread Length (mm) | 21.00 |
| Application | Threading |
| Shank Diameter (mm) | 11.0000 |
| Shank Diameter (Decimal Inch) | 0.4331 |
| Tapping Depth (mm) | 21.00 |
| Tapping Depth (Decimal Inch) | 0.8268 |
| Square Length (mm) | 12.00 |
| Square Length (Decimal Inch) | 0.4724 |
| Square Size (mm) | 9.00 |
| Square Size (Decimal Inch) | 0.3543 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| Tap Type | Straight Flute |
| Thread Size (mm) | MF14x1.5 |
| Thread Standard | Metric Fine |
| Chamfer | Semi-Bottoming |
| Material | High-Speed Steel-E |
| Coating/Finish | TiN |
| Thread Direction | Right Hand |
| Coolant Through | Yes |
| Class Of Fit | 6HX |
| Thread Limit | H9 |
| Number Of Flutes | 3 |
| Oversize | No |
| Overall Length (Decimal Inch) | 3.9370 |
| Overall Length (mm) | 100.0000 |
| Thread Pitch (mm) | 1.50 |
| Thread Length (Inch) | 0.8268 |
| Thread Length (mm) | 21.00 |
| Application | Threading |
| Shank Diameter (mm) | 11.0000 |
| Shank Diameter (Decimal Inch) | 0.4331 |
| Tapping Depth (mm) | 21.00 |
| Tapping Depth (Decimal Inch) | 0.8268 |
| Square Length (mm) | 12.00 |
| Square Length (Decimal Inch) | 0.4724 |
| Square Size (mm) | 9.00 |
| Square Size (Decimal Inch) | 0.3543 |
| Series | TC130 |
| UNSPSC Code | 23241600 |
| MSC Part # | 59343830 |
| Mfr Part # | 8237483 |
| Country of Origin Country of Origin is subject to change | Germany |
$143.55
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It