Safety > Signs Identification & Lockout/Tagout (ET04) - (19582 Products)
Brand: Micro 100 / Part #: QRR-020-1000-370X
Item #: 85899896
Brand: Micro 100
Model #: QRR-020-1000-370X
Product Specifications
| Grooving Tool Type | Retaining Ring |
| Cutting Direction | Right Hand |
| Groove Width (Decimal Inch) | 0.0200 |
| Shank Diameter (Decimal Inch) | 3/8 |
| Overall Length (Decimal Inch) | 2.5000 |
| Finish | AlTiN |
| Material | Solid Carbide |
| Interior/Exterior | Interior |
| Undercut | No |
| Pre-parting | No |
| Maximum Hole Depth (Decimal Inch) | 1.0000 |
| Maximum Hole Depth (Inch) | 1 |
| Shank Length (Decimal Inch) | 1.3530 |
| Overall Length (Inch) | 2-1/2 |
| Projection (Decimal Inch) | 0.0500 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Micro 100 / Part #: QRR-030-1000-370X
Item #: 85899524
Brand: Micro 100
Model #: QRR-030-1000-370X
Product Specifications
| Grooving Tool Type | Retaining Ring |
| Cutting Direction | Right Hand |
| Groove Width (Decimal Inch) | 0.0300 |
| Shank Diameter (Decimal Inch) | 3/8 |
| Overall Length (Decimal Inch) | 2.5000 |
| Finish | AlTiN |
| Material | Solid Carbide |
| Interior/Exterior | Interior |
| Undercut | No |
| Pre-parting | No |
| Maximum Hole Depth (Decimal Inch) | 1.0000 |
| Maximum Hole Depth (Inch) | 1 |
| Shank Length (Decimal Inch) | 1.3530 |
| Overall Length (Inch) | 2-1/2 |
| Projection (Decimal Inch) | 0.0500 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Grooving Tool: Interior, Right Hand
Item #: 05218599
Brand: Micro 100
Model #: FGIF-1413X
Product Specifications
| Grooving Tool Type | Retaining Ring |
| Cutting Direction | Right Hand |
| Groove Width (Decimal Inch) | 0.0300 |
| Shank Diameter (Inch) | 5/16 |
| Overall Length (Decimal Inch) | 3.0000 |
| Maximum Hole Depth (Decimal Inch) | 1.2500 |
| Projection (Decimal Inch) | 0.0600 |
| Material | Solid Carbide |
| Interior/Exterior | Interior |
| Undercut | No |
| Maximum Hole Depth (Inch) | 1-1/4 |
| Shank Length (Decimal Inch) | 1.2500 |
| Overall Length (Inch) | 2-1/2 |
| UNSPSC Code | 23241600 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Grooving Tool: Interior, Right Hand
Item #: 05242003
Brand: Micro 100
Model #: QFGI-6600
Product Specifications
| Grooving Tool Type | Retaining Ring |
| Cutting Direction | Right Hand |
| Groove Width (Decimal Inch) | 0.0300 |
| Shank Diameter (Inch) | 1/4 |
| Overall Length (Decimal Inch) | 2.5000 |
| Maximum Hole Depth (Decimal Inch) | 0.7500 |
| Projection (Decimal Inch) | 0.0600 |
| Material | Solid Carbide |
| Interior/Exterior | Interior |
| Undercut | No |
| Maximum Hole Depth (Inch) | 3/4 |
| Shank Length (Decimal Inch) | 1.2500 |
| Overall Length (Inch) | 2 |
| UNSPSC Code | 23241600 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Micro 100 / Part #: QBB5-140250X
Item #: 85780807
Brand: Micro 100
Model #: QBB5-140250X
Product Specifications
| Boring Bar Type | Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.1520 |
| Material | Solid Carbide |
| Maximum Bore Depth (Decimal Inch) | 0.2500 |
| Shank Diameter (Decimal Inch) | 3/16 |
| Overall Length (Inch) | 1-1/2 |
| Finish Coating | AlTiN |
| Series | Quick Change - Boring Tools - Right Hand |
| Corner Radius | 0.0050 |
| Maximum Bore Depth (Inch) | 1/4 |
| Offset (Decimal Inch) | 0.0463 |
| Overall Length (Decimal Inch) | 1.5000 |
| Projection (Decimal Inch) | 0.0350 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2836621
Item #: 70736558
Brand: Widia
Model #: 2836621
Product Specifications
| Boring Bar Type | Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.0620 |
| Material | Solid Carbide |
| Material Grade | Ultra Fine Grain |
| Maximum Bore Depth (Decimal Inch) | 0.3120 |
| Shank Diameter (Decimal Inch) | 1/16 |
| Finish Coating | Bright/Uncoated |
| Corner Radius (Decimal Inch) | 0.0000 |
| Bar End Angle | 2 |
| Manufacturer Grade | CM1 |
| Series | ABD Series |
| Coating Process | Uncoated |
| Manufacturers Catalog Number | ABD06312R |
| Overall Length (Decimal Inch) | 0.9620 |
| Primary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
| Secondary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2836604
Item #: 70740758
Brand: Widia
Model #: 2836604
Product Specifications
| Boring Bar Type | Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.0940 |
| Material | Solid Carbide |
| Material Grade | Submicron |
| Maximum Bore Depth (Decimal Inch) | 0.5000 |
| Shank Diameter (Decimal Inch) | 3/32 |
| Finish Coating | Titanium Nitride |
| Corner Radius (Decimal Inch) | 0.0000 |
| Bar End Angle | 2 |
| Manufacturer Grade | CG5 |
| Series | ABD Series |
| Coating Process | PVD |
| Manufacturers Catalog Number | ABD09500R |
| Overall Length (Decimal Inch) | 1.1500 |
| Primary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
| Secondary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Micro 100 / Part #: QBB5-160250X
Item #: 85781797
Brand: Micro 100
Model #: QBB5-160250X
Product Specifications
| Boring Bar Type | Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.1760 |
| Material | Solid Carbide |
| Maximum Bore Depth (Decimal Inch) | 0.2500 |
| Shank Diameter (Decimal Inch) | 3/16 |
| Overall Length (Inch) | 1-1/2 |
| Finish Coating | AlTiN |
| Series | Quick Change - Boring Tools - Right Hand |
| Corner Radius | 0.0050 |
| Maximum Bore Depth (Inch) | 1/4 |
| Offset (Decimal Inch) | 0.0663 |
| Overall Length (Decimal Inch) | 1.5000 |
| Projection (Decimal Inch) | 0.0400 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2836582
Item #: 70749494
Brand: Widia
Model #: 2836582
Product Specifications
| Boring Bar Type | Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.1250 |
| Material | Solid Carbide |
| Material Grade | Submicron |
| Maximum Bore Depth (Decimal Inch) | 0.6250 |
| Shank Diameter (Decimal Inch) | 1/8 |
| Finish Coating | Titanium Nitride |
| Corner Radius (Decimal Inch) | 0.0000 |
| Bar End Angle | 2 |
| Manufacturer Grade | CG5 |
| Series | ABD Series |
| Coating Process | PVD |
| Manufacturers Catalog Number | ABD125625R |
| Overall Length (Decimal Inch) | 1.2750 |
| Primary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
| Secondary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Micro 100 / Part #: QBB-3201500-000
Item #: 85779577
Brand: Micro 100
Model #: QBB-3201500-000
Product Specifications
| Boring Bar Type | Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.3400 |
| Material | Solid Carbide |
| Maximum Bore Depth (Decimal Inch) | 1.5000 |
| Shank Diameter (Decimal Inch) | 3/8 |
| Overall Length (Inch) | 3 |
| Finish Coating | Bright/Uncoated |
| Series | Quick Change - Boring Tools - Right Hand - Sharp |
| Maximum Bore Depth (Inch) | 1-1/2 |
| Offset (Decimal Inch) | 0.1325 |
| Overall Length (Decimal Inch) | 3.0000 |
| Projection (Decimal Inch) | 0.0800 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2836495
Item #: 97595334
Brand: Widia
Model #: 2836495
Product Specifications
| Boring Bar Type | Micro Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.0940 |
| Material | Solid Carbide |
| Material Grade | Fine Grain |
| Maximum Bore Depth (Decimal Inch) | 0.2810 |
| Shank Diameter (Decimal Inch) | 5/32 |
| Finish Coating | Bright/Uncoated |
| Manufacturer Grade | CM1 |
| Series | APD |
| Coating Process | Uncoated |
| Maximum Depth of Cut (mm) | 0.03 |
| Overall Length (Decimal Inch) | 0.9310 |
| Primary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
| Relief Angle | -3.000 |
| Secondary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2836573
Item #: 19303171
Brand: Widia
Model #: 2836573
Product Specifications
| Boring Bar Type | Micro Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.1560 |
| Material | Solid Carbide |
| Material Grade | Submicron |
| Shank Diameter (Decimal Inch) | 5/32 |
| Finish Coating | Titanium Nitride |
| Bar End Angle | 2 |
| Manufacturer Grade | CG5 |
| Series | ABD |
| Bar Neck Diameter (Inch) | 11/64 |
| Bar Neck Length (Inch) | 1/2 |
| Coating Process | PVD |
| Maximum Bore Depth (Inch) | 1/2 |
| Maximum Depth of Cut (mm) | 0.07 |
| Minimum Bore Diameter (Inch) | 5/32 |
| Overall Length (Decimal Inch) | 1.1500 |
| Primary Workpiece Material | Stainless Steel; Non-Ferrous Metals; Cast Iron; Steel |
| Projection (Decimal Inch) | 0.5000 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Grooving Tool: Interior, Right Hand
Item #: 07098387
Brand: Made in USA
Model #: 22-1275
Product Specifications
| Grooving Tool Type | Retaining Ring |
| Cutting Direction | Right Hand |
| Minimum Hole Diameter (Decimal Inch) | 0.0550 |
| Shank Diameter (Inch) | 3/16 |
| Overall Length (Decimal Inch) | 1.5000 |
| Maximum Hole Depth (Decimal Inch) | 0.5000 |
| Projection (Decimal Inch) | 0.0050 |
| Material | Solid Carbide |
| Interior/Exterior | Interior |
| Undercut | Yes |
| Material Grade | Micrograin |
| Maximum Hole Depth (Inch) | 1/2 |
| Shank Length (Decimal Inch) | 2.0000 |
| Overall Length (Inch) | 1-1/2 |
| Tool Bit Adjusting Screw | No |
| Manufacturer's Part Number | 22-1275 |
| UNSPSC Code | 23241600 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2836614
Item #: 20057394
Brand: Widia
Model #: 2836614
Product Specifications
| Boring Bar Type | Micro Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.0940 |
| Material | Solid Carbide |
| Material Grade | Submicron |
| Shank Diameter (Decimal Inch) | 5/32 |
| Finish Coating | Titanium Nitride |
| Bar End Angle | 2 |
| Manufacturer Grade | CG5 |
| Series | ABD |
| Bar Neck Diameter (Inch) | 7/64 |
| Bar Neck Length (Inch) | 9/32 |
| Coating Process | PVD |
| Maximum Bore Depth (Inch) | 9/32 |
| Maximum Depth of Cut (mm) | 0.04 |
| Minimum Bore Diameter (Inch) | 3/32 |
| Overall Length (Decimal Inch) | 0.9310 |
| Primary Workpiece Material | Stainless Steel; Non-Ferrous Metals; Cast Iron; Steel |
| Projection (Decimal Inch) | 0.2810 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2836593
Item #: 73853608
Brand: Widia
Model #: 2836593
Product Specifications
| Boring Bar Type | Micro Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.1250 |
| Material | Solid Carbide |
| Material Grade | Submicron |
| Shank Diameter (Decimal Inch) | 5/32 |
| Finish Coating | Titanium Nitride |
| Bar End Angle | 2 |
| Manufacturer Grade | CG5 |
| Series | ABD |
| Bar Neck Diameter (Inch) | 9/64 |
| Bar Neck Length (Inch) | 3/8 |
| Coating Process | PVD |
| Maximum Bore Depth (Inch) | 3/8 |
| Maximum Depth of Cut (mm) | 0.06 |
| Minimum Bore Diameter (Inch) | 1/8 |
| Overall Length (Decimal Inch) | 1.0250 |
| Primary Workpiece Material | Stainless Steel; Non-Ferrous Metals; Cast Iron; Steel |
| Projection (Decimal Inch) | 0.3750 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2836632
Item #: 70742358
Brand: Widia
Model #: 2836632
Product Specifications
| Boring Bar Type | Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.0620 |
| Material | Solid Carbide |
| Material Grade | Ultra Fine Grain |
| Maximum Bore Depth (Decimal Inch) | 0.1870 |
| Shank Diameter (Decimal Inch) | 1/16 |
| Finish Coating | Bright/Uncoated |
| Corner Radius (Decimal Inch) | 0.0000 |
| Bar End Angle | 2 |
| Manufacturer Grade | CM1 |
| Series | ABD Series |
| Coating Process | Uncoated |
| Manufacturers Catalog Number | ABD06187R |
| Overall Length (Decimal Inch) | 0.8629 |
| Primary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
| Secondary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Grooving Tool: Interior, Right Hand, 1/2" Shank Dia
Item #: 85069870
Brand: Micro 100
Model #: FG-4909
Product Specifications
| Grooving Tool Type | Face |
| Cutting Direction | Right Hand |
| Groove Width (Decimal Inch) | 0.0620 |
| Shank Diameter (Inch) | 1/2 |
| Shank Diameter (mm) | 12.7000 |
| Overall Length (Decimal Inch) | 3.0000 |
| Full Radius | No |
| Maximum Hole Depth (Decimal Inch) | 1.2500 |
| Projection (Decimal Inch) | 0.1000 |
| Material | Solid Carbide |
| Interior/Exterior | Interior |
| Undercut | No |
| Maximum Hole Depth (Inch) | 1-1/4 |
| Overall Length (Inch) | 3 |
| UNSPSC Code | 23241600 |
| Country of Origin | UNITED STATES |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Widia / Part #: 2836473
Item #: 97595342
Brand: Widia
Model #: 2836473
Product Specifications
| Boring Bar Type | Micro Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.1560 |
| Material | Solid Carbide |
| Material Grade | Fine Grain |
| Shank Diameter (Decimal Inch) | 5/32 |
| Finish Coating | Bright/Uncoated |
| Manufacturer Grade | CM1 |
| Series | APD |
| Coating Process | Uncoated |
| Maximum Bore Depth (Inch) | 1/2 |
| Maximum Depth of Cut (mm) | 0.05 |
| Overall Length (Decimal Inch) | 1.1500 |
| Primary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
| Relief Angle | -3.000 |
| Secondary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Micro 100 / Part #: BB6-230750X
Item #: 85418358
Brand: Micro 100
Model #: BB6-230750X
Product Specifications
| Boring Bar Type | Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.2500 |
| Material | Solid Carbide |
| Maximum Bore Depth (Decimal Inch) | 0.7500 |
| Shank Diameter (Decimal Inch) | 5/16 |
| Overall Length (Inch) | 2-1/2 |
| Finish Coating | AlTiN |
| Series | Standard - Boring Tools - Right Hand |
| Corner Radius | 0.0060 |
| Maximum Bore Depth (Inch) | 3/4 |
| Minimum Bore Diameter (Inch) | 1/4 |
| Offset (Decimal Inch) | 0.0738 |
| Overall Length (Decimal Inch) | 2.5000 |
| Projection (Decimal Inch) | 0.0570 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Micro 100 / Part #: QMBB-020050X
Item #: 85894103
Brand: Micro 100
Model #: QMBB-020050X
Product Specifications
| Boring Bar Type | Micro Boring |
| Cutting Direction | Right Hand |
| Minimum Bore Diameter (Decimal Inch) | 0.0180 |
| Material | Solid Carbide |
| Maximum Bore Depth (Decimal Inch) | 0.0500 |
| Shank Diameter (Decimal Inch) | 3/16 |
| Overall Length (Inch) | 1-1/2 |
| Finish Coating | AlTiN |
| Series | Quick Change - Boring Tools - Right Hand - Sharp - Miniature |
| Offset (Decimal Inch) | 0.0100 |
| Overall Length (Decimal Inch) | 1.5000 |
| Projection (Decimal Inch) | 0.0020 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It