Hose, Tube, Fittings & Valves > Clamps Hangers & Supports (ET04) - (2980 Products)
Hose, Tube, Fittings & Valves > Clamps Hangers & Supports (ET04)
Corner Radius End Mill: 14.00 mm Dia, 57.00 mm LOC, 0.20 mm Radius, 5 Flute, Solid Carbide
Item #: 09750845
Brand: WNT
Model #: 5359314002
Product Specifications
| Mill Diameter (mm) | 14.00 |
| Number Of Flutes | 5 |
| Length of Cut (mm) | 57.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DPX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.20 |
| Overall Length (mm) | 113.0000 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 14.0000 |
| Neck Diameter (mm) | 13.600 |
| UNSPSC Code | 27112803 |
$175.75
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1/2" Dia, 5/8" LOC, 2.29 mm Radius, 8 Flute, Solid Carbide
Item #: 09291295
Brand: Kennametal
Model #: 7102430
Product Specifications
| Mill Diameter (Inch) | 1/2 |
| Mill Diameter (Decimal Inch) | 0.5 |
| Number Of Flutes | 8 |
| Length of Cut (Inch) | 5/8 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | AlCrN |
| Overall Length (Inch) | 3 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0900 |
| Variable Index | Yes |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 2.29 |
| Coolant Through | Yes |
| Overall Length (Decimal Inch) | 3 |
| Chipbreaker | Yes |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.6250 |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Shank Diameter (Inch) | 1/2 |
| UNSPSC Code | 27112803 |
| Series | HARVI IV |
$121.36
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Square End Mill: 0.7500" Dia, 3.2500" LOC, 7 Flute, Solid Carbide
Item #: 53455259
Brand: Walter-Prototyp
Model #: 8203554
Product Specifications
| Mill Diameter (Decimal Inch) | 0.7500 |
| Mill Diameter (Inch) | 3/4 |
| Number Of Flutes | 7 |
| End Mill Material | Solid Carbide |
| Length of Cut (Decimal Inch) | 3.2500 |
| Length of Cut (Inch) | 3-1/4 |
| Shank Diameter (Inch) | 3/4 |
| Shank Diameter (Decimal Inch) | 0.7500 |
| Overall Length (Decimal Inch) | 6.0000 |
| Overall Length (Inch) | 6 |
| Centercutting | Yes |
| Cutting Direction | Right Hand |
| Flute Direction | Right Hand |
| Extended Reach | No |
| Helix Angle | 38 |
| Primary Workpiece Material | Super Alloys & Titanium |
| Primary Workpiece Material Code | S |
| Secondary Workpiece Material | Stainless Steel; Steel |
| Secondary Workpiece Material Code | P; M |
| Coating/Finish | nACRo |
| Variable Helix | No |
| Variable Index | No |
| Chipbreaker | Yes |
| Flute Type | Spiral |
| Shank Type | Cylindrical |
| Material Grade | Solid Carbide |
| Length Type | Standard |
| Reach Length (Decimal Inch) | 3.2500 |
| Shank Diameter Tolerance | h6 |
| Series | MD173 |
| UNSPSC Code | 27112803 |
$599.94
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 4.00 mm Dia, 10.00 mm LOC, 45 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HMERS
Item #: 09469396
Brand: US Union Tool
Model #: 2151005
Product Specifications
| Mill Diameter (mm) | 4.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 10.00 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.20 |
| Overall Length (mm) | 60 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.3750 |
| Length Type | Long |
| Extended Reach | No |
| Shank Diameter (mm) | 6 |
| Mill Diameter Tolerance | -0.02 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HMERS |
$165.19
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1" Dia, 3" LOC, 3.17 mm Radius, 5 Flute, Solid Carbide
Item #: 65102683
Brand: Cleveland
Model #: C60614
Product Specifications
| Mill Diameter (Inch) | 1 |
| Mill Diameter (Decimal Inch) | 1.0000 |
| Mill Diameter (mm) | 25.40 |
| Number Of Flutes | 5 |
| Length of Cut (mm) | 76.20 |
| Length of Cut (Inch) | 3 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Chipbreaker | No |
| Coating/Finish | Bright/Uncoated |
| Overall Length (Inch) | 6 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.1250 |
| Variable Index | Yes |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 3.17 |
| Overall Length (mm) | 152.40 |
| Coolant Through | No |
| Overall Length (Decimal Inch) | 6.0000 |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 3.0000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Finishing |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Shank Diameter (Inch) | 1 |
| Shank Diameter (mm) | 25.40 |
| Primary Workpiece Material | Steel |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | P |
| Secondary Workpiece Material | Stainless Steel; High Temperature Alloy |
| Secondary Workpiece Material Code | S; M |
| Material Grade | Submicron |
| Series | CEM-V2-5R |
| Mill Diameter (Inch) | 1 |
| Mill Diameter (Decimal Inch) | 1.0000 |
| Mill Diameter (mm) | 25.40 |
| Number Of Flutes | 5 |
| Length of Cut (mm) | 76.20 |
| Length of Cut (Inch) | 3 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Chipbreaker | No |
| Coating/Finish | Bright/Uncoated |
| Overall Length (Inch) | 6 |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.1250 |
| Variable Index | Yes |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 3.17 |
| Overall Length (mm) | 152.40 |
| Coolant Through | No |
| Overall Length (Decimal Inch) | 6.0000 |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 3.0000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Finishing |
| Shank Diameter (Decimal Inch) | 1.0000 |
| Shank Diameter (Inch) | 1 |
| Shank Diameter (mm) | 25.40 |
| Primary Workpiece Material | Steel |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | P |
| Secondary Workpiece Material | Stainless Steel; High Temperature Alloy |
| Secondary Workpiece Material Code | S; M |
| Material Grade | Submicron |
| Series | CEM-V2-5R |
| MSC Part # | 65102683 |
| Mfr Part # | C60614 |
| Country of Origin Country of Origin is subject to change | UNITED STATES |
$630.66
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 14.00 mm Dia, 57.00 mm LOC, 1.00 mm Radius, 5 Flute, Solid Carbide
Item #: 09750829
Brand: WNT
Model #: 5359314010
Product Specifications
| Mill Diameter (mm) | 14.00 |
| Number Of Flutes | 5 |
| Length of Cut (mm) | 57.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DPX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 1.00 |
| Overall Length (mm) | 113.0000 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 14.0000 |
| Neck Diameter (mm) | 13.600 |
| UNSPSC Code | 27112803 |
$179.34
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 14.00 mm Dia, 26.00 mm LOC, 3 Flute, 0.20 mm Chamfer Width, Solid Carbide
Item #: 05892013
Brand: WNT
Model #: 5359914000
Product Specifications
| Mill Diameter (mm) | 14.00 |
| Number Of Flutes | 3 |
| Length of Cut (mm) | 26.00 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | PCD |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.20 |
| Overall Length (mm) | 83.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Short |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 14.00 |
| Neck Diameter (mm) | 13.000 |
| UNSPSC Code | 23241614 |
| Series | 53599 |
$136.52
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 8.00 mm Dia, 25.00 mm LOC, 2.00 mm Radius, 6 Flute, Solid Carbide
Item #: 05881420
Brand: WNT
Model #: 5364208220
Product Specifications
| Mill Diameter (mm) | 8.00 |
| Number Of Flutes | 6 |
| Length of Cut (mm) | 25.0000 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | DPX72S |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 2.00 |
| Overall Length (mm) | 71.0000 |
| Coolant Through | No |
| Chipbreaker | No |
| End Type | Corner Radius |
| Flute Type | Spiral |
| Extended Reach | No |
| Shank Type | Weldon Flat |
| Shank Diameter (mm) | 8.0000 |
| Neck Diameter (mm) | 7.700 |
| UNSPSC Code | 27112803 |
| Series | 53642 |
$67.68
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ball End Mill: 1/8" Dia, 3/8" LOC, 4 Flute, Solid Carbide
Item #: 19312537
Brand: M.A. Ford
Model #: 14012500GX
Product Specifications
| Mill Diameter (Inch) | 1/8 |
| Mill Diameter (Decimal Inch) | 0.1250 |
| Number Of Flutes | 4 |
| End Mill Material | Solid Carbide |
| Length of Cut (Inch) | 3/8 |
| Coating/Finish | GemX |
| Overall Length (Inch) | 1-1/2 |
| Shank Diameter (Inch) | 1/8 |
| Variable Helix | No |
| Variable Index | No |
| Helix Angle | 30 |
| UNSPSC Code | 27112803 |
| Centercutting | Yes |
| Single Or Double End | Single |
$109.24
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 1/2" Dia, 1" LOC, 45 deg Helix, Corner Radius End, Series GM
Item #: 51020022
Brand: YG-1
Model #: GM668902
Product Specifications
| Mill Diameter (Inch) | 1/2 |
| Mill Diameter (Decimal Inch) | 0.5 |
| Number Of Flutes | 6 |
| Length of Cut (Inch) | 1 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Overall Length (Inch) | 6 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Corner Radius (Decimal Inch) | 0.0300 |
| Variable Index | No |
| Variable Helix | No |
| Cutting Direction | Right Hand |
| Coolant Through | No |
| Pitch | Close |
| Overall Length (Decimal Inch) | 6 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 1.0000 |
| Length Type | Extended |
| Flute Type | Spiral |
| Extended Reach | Yes |
| Shank Type | Straight-Cylindrical |
| Material Removal Type | Roughing & Finishing |
| Shank Diameter (Decimal Inch) | 0.5000 |
| Shank Diameter (Inch) | 1/2 |
| Reach Length (Decimal Inch) | 3.2500 |
| Reach Length (Inch) | 3-1/4 |
| Mill Diameter Tolerance | +0.0000/-0.0012 in |
| Shank Diameter Tolerance | +0.0000/-0.0003 in |
| Primary Workpiece Material | Steel |
| UNSPSC Code | 27112803 |
| Primary Workpiece Material Code | P |
| Secondary Workpiece Material | Cast Iron |
| Secondary Workpiece Material Code | K |
| Material Grade | Micrograin |
| Series | GM |
| Material Application | Steel |
| Coating Classification | PVD |
| For Use With. | Toolholders |
| Helix Style | High |
| Manufacturers Catalog Number | GM668902 |
$135.97
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Chamfer End Mill: 0.50 mm Dia, 0.50 mm LOC, 2 Flute, 0.05 mm Chamfer Width, Solid Carbide
Item #: 09765645
Brand: WNT
Model #: 50900054
Product Specifications
| Mill Diameter (mm) | 0.50 |
| Number Of Flutes | 2 |
| Length of Cut (mm) | 0.50 |
| Single Or Double End | Single |
| End Mill Material | Solid Carbide |
| Coating/Finish | Ti1001 |
| Centercutting | No |
| Flute Direction | Right Hand |
| Variable Index | No |
| Variable Helix | Yes |
| Cutting Direction | Right Hand |
| Chamfer Width (mm) | 0.05 |
| Overall Length (mm) | 55.00 |
| Coolant Through | No |
| Chipbreaker | No |
| Chamfer Angle | 45.000 |
| Length Type | Long |
| Flute Type | Variable |
| Extended Reach | No |
| Shank Type | Straight-Cylindrical |
| Shank Diameter (mm) | 3.00 |
| Neck Diameter (mm) | 0.450 |
| UNSPSC Code | 23241614 |
| Series | 50900 |
$70.46
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Ball End Mill: 3/64" Dia, 0.0700" LOC, 3 Flute, Solid Carbide
Item #: 44892438
Brand: Harvey Tool
Model #: 54447
Product Specifications
| Mill Diameter (Inch) | 3/64 |
| Mill Diameter (Decimal Inch) | 0.0470 |
| Mill Diameter (mm) | 1.20 |
| Number Of Flutes | 3 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Bright/Uncoated |
| Overall Length (Inch) | 2-1/2 |
| Shank Diameter (Inch) | 1/8 |
| Extended Reach | Yes |
| Variable Helix | Yes |
| Variable Index | No |
| Helix Angle | 42 |
| Overall Length (Decimal Inch) | 2.5000 |
| Chipbreaker | No |
| Undercutting | No |
| Length Of Cut Range (Decimal Inch) | 0.0500 - 0.1000 |
| Length Type | Stub |
| Helix Style | Variable |
| Material Removal Type | Roughing |
| Shank Diameter (Decimal Inch) | 0.1250 |
| Nose Radius (Decimal Inch) | 0.0235 |
| Neck Length (Decimal Inch) | 0.3050 |
| Reach Length (Inch) | 3/8 |
| Reach Length (Decimal Inch) | 0.3750 |
| Mill Diameter Tolerance | +0.0005/-0.0005 in |
| Shank Diameter Tolerance | h6 |
| Primary Workpiece Material | Non-Ferrous Metal; Stainless Steel; Cast Iron; Steel |
| Primary Workpiece Material Code | P; K; M; N |
| Material Grade | Carbide |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Series | Variable Helix End Mills for Aluminum Alloys - Ball - Long Reach, Stub Flute, Material Specific End Mills |
| Flute Type | Spiral |
| UNSPSC Code | 27112803 |
| Centercutting | Yes |
| Coating Classification | Uncoated |
| Single Or Double End | Single |
| Shank Type | Straight-Cylindrical |
| Pitch | Normal |
| Coolant Through | No |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.0700 |
| Manufacturers Catalog Number | 54447 |
| System Of Measurement | Fractional Inch |
$56.43
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Corner Radius End Mill: 3.00 mm Dia, 2.40 mm LOC, 30 deg Helix, Hardmax Coated, Corner Radius End, Centercutting Series HLRS
Item #: 09866757
Brand: US Union Tool
Model #: 2938119
Product Specifications
| Mill Diameter (mm) | 3.00 |
| Number Of Flutes | 4 |
| Length of Cut (mm) | 2.40 |
| End Mill Material | Solid Carbide |
| Coating/Finish | Hardmax |
| Centercutting | Yes |
| Flute Direction | Right Hand |
| Cutting Direction | Right Hand |
| Corner Radius (mm) | 0.10 |
| Overall Length (mm) | 55 |
| Chipbreaker | No |
| End Type | Corner Radius |
| Length Of Cut (Decimal Inch - 4 Decimals) | 0.5000 |
| Length Type | Long |
| Extended Reach | Yes |
| Shank Diameter (mm) | 4.00 |
| Mill Diameter Tolerance | -0.015 |
| Shank Diameter Tolerance | -0.005 |
| UNSPSC Code | 27112803 |
| Material Grade | Super MG |
| Series | HLRS |
$87.69
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It