BES Up To 2022 $100-$250 Products - (25001 Products)
4MT Ball/Needle Bearing - Live Center
Item #: HL2161062
Manufacturer: Rapidhold
Mfg #:
Technical Specifications:
*Accuracy: .0002
*Brand Name: Rapidhold
*Head Diameter: 2.3622
*Head Length: 1.845
*Max. RPM: 4500
*Mount: 4 MT
*Overall Length: 7.7165
*Point Diameter: 1.3730
*Point Length: 1.6929
*Point Style: Standard
*Radial Load: 880 lbs
*Style: 102 Series Ball/Needle Bearing
*Type: Heavy Duty Live Center
Description:
*Live Center - 102 Series
*Machined from one piece of forging, hardened and precisely ground
*Three precision, high-quality bearings are protected by a special Steel shield and neoprene seal
*Adjustable, ultra precision radial bearing reduces run out to minimum after much use
*Easy to adjust
Shipping Info:
*Actual Weight - 3.4500
*Dimensions - Height: 3.10 Length: 9.20 Width: 3.20
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 5/32 x 3-1/2 - Oil Hardening Flat Stock
Item #: LY4054333
Manufacturer: Starrett
Mfg #: 54333
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 5/32
*Width: 3-1/2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 5.6400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 1/2 x 2 - Air Hardening Flat Stock
Item #: LY4554748
Manufacturer: Starrett
Mfg #: 54748
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1/2
*Width: 2
Description:
*A-2 Air Hardening Ground Flat Stock 18" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 5.1600
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4 x 4-1/2 x 18 - 496 Oil Hardening Precsision Ground Flat Stock
Item #: LY4156983
Manufacturer: Starrett
Mfg #: 56983
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 1/4
*Width: 4-1/2
Description:
*AISI 01 oil hardening tool steel. Standard size: +/-.001" thickness tolerance
*Dimensionally stable -- can be used for intricate work including thin sections, with a minimum danger of cracking
*Ground straight and parallel
Shipping Info:
*Actual Weight - 5.7400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/16 x 3-1/2 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8054929
Manufacturer: Starrett
Mfg #: 54929
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 3/16
*Width: 3-1/2
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 4.4600
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 1/2 x 2 - Oversize Air Hardening Flat Stock
Item #: LY4657198
Manufacturer: Starrett
Mfg #: 57198
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 1/2
*Width: 2
Description:
*A-2 Air Hardening Ground Flat Stock 18" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 5.3100
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/16 x 5 - Air Hardening Flat Stock
Item #: LY561213
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 36
*Material: A-2
*Thick: 3/16
*Width: 5
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 9.6700
*Dimensions - Height: .375 Length: 36.0 Width: 5.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
0773 #12 SCREW EXTRACTOR CARBON
Item #: MT6620212
Manufacturer: Morse Cutting Tools
Mfg #: 20212
Technical Specifications:
Description:
Shipping Info:
*Actual Weight - 4.7400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10089 5/16X5/16X13/16
Item #: CR1010089
Brand: Melin Tool Co
Model #: 10089
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 5/16″ |
| Usable Length (LU) | 13/16″ |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| End Shape | Ball |
| Overall Length (OAL) | 2-1/2 |
| Style | Micro End Mills |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.3125″ |
| Coating | CVD-DIA |
| Series/List # | CCMG-DIA |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
10.5 mm Dia. × 10 mm Shank × 46 mm Flute Length × 160 mm OAL, 2xD, EgiAs, 2 Flute, No, Solid Carbide Drill
Item #: TP353333050
Brand: OSG USA, Inc.
Model #: 3333050
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 10.5 mm |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 10.5 mm |
| Tool Type | Stub Drill |
| Length Group | 2xD |
| Measurement Type | Metric |
| Coating | EgiAs |
| Series/List # | 5705 |
| Applicable Material | Super-Alloys / Titanium | Aluminum / Non-Ferrous Materials |
| Usable Length (LU) | 46 mm |
| Connection Diameter Machine Side (DCONMS) | 10 mm |
| Length Chip Flute (LCF) | 46 mm |
| Coolant Supply Property (CSP) | External |
| Overall Length (OAL) | 160 mm |
| Point Angle (SIG) | 0 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 46 mm |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
S075MOD08SK-65
Item #: IC524502365
Brand: Ingersoll
Model #: 4502365
| Product Specifications | |
|---|---|
| Connection Code Workpiece Side (CCWS) | M08 |
| Head Diameter | 0.51″ |
| Protruding Length (LPR) | 6-1/2″ |
| Measurement Type | Inch |
| Collet Size | - |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
S100MOD10SK-80
Item #: IC524502368
Brand: Ingersoll
Model #: 4502368
| Product Specifications | |
|---|---|
| Connection Code Workpiece Side (CCWS) | M10 |
| Head Diameter | 0.71″ |
| Protruding Length (LPR) | 8″ |
| Measurement Type | Inch |
| Collet Size | - |
| Body Material | Steel |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Hard Step Jaw 6″ × 1.0 1 Pr
Item #: HT7560014
Brand: Snap Jaws
Model #: 6HSJ-990
| Product Specifications | |
|---|---|
| Type | Jaw |
| Jaw Width | .730″ |
| Length | 6.00″ |
| Height | 1.530″ |
| Width | .730″ |
| Model No | 6HSJ-990 |
| Number of Pieces | 2 |
| System of Measurement | Imperial |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7.1 mm Dia. × 8 mm Shank × 78 mm Flute Length × 140 mm OAL, 8xD, EgiAs, 2 Flute, Coolant Thru, Solid Carbide Drill
Item #: TP348704710
Brand: OSG USA, Inc.
Model #: 8704710
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7.1 mm |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 7.1 mm |
| Tool Type | Taper Drill |
| Length Group | 8xD |
| Measurement Type | Metric |
| Coating | EgiAs |
| Series/List # | 6520 |
| Applicable Material | Stainless Steel | Aluminum / Non-Ferrous Materials | Super-Alloys / Titanium |
| Usable Length (LU) | 78 mm |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Length Chip Flute (LCF) | 78 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 140 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 78 mm |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7.3 mm Dia. × 8 mm Shank × 80 mm Flute Length × 140 mm OAL, 8xD, EgiAs, 2 Flute, Coolant Thru, Solid Carbide Drill
Item #: TP348704730
Brand: OSG USA, Inc.
Model #: 8704730
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7.3 mm |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 7.3 mm |
| Tool Type | Taper Drill |
| Length Group | 8xD |
| Measurement Type | Metric |
| Coating | EgiAs |
| Series/List # | 6520 |
| Applicable Material | Stainless Steel | Aluminum / Non-Ferrous Materials | Super-Alloys / Titanium |
| Usable Length (LU) | 80 mm |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Length Chip Flute (LCF) | 80 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 140 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 80 mm |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
9/32″ Dia. × 5/16″ Shank × 79 mm Flute Length × 140 mm OAL, 8xD, WXL, 2 Flute, Coolant Thru, Solid Carbide Drill
Item #: TP34522028112
Brand: OSG USA, Inc.
Model #: 522028112
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 9/32″ |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Inch | 9/32″ |
| Tool Type | Taper Drill |
| Decimal Equivalent | 0.2813″ |
| Measurement Type | Inch |
| Length Group | 8xD |
| Series/List # | 5220 |
| Coating | WXL |
| Usable Length (LU) | 79 mm |
| Applicable Material | Steel | Aluminum / Non-Ferrous Materials | Hard Materials |
| Length Chip Flute (LCF) | 79 mm |
| Connection Diameter Machine Side (DCONMS) | 5/16″ |
| Overall Length (OAL) | 140 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 140 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Functional Length (LF) | 79 mm |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7.4 mm Dia. × 8 mm Shank × 81 mm Flute Length × 140 mm OAL, 8xD, EgiAs, 2 Flute, Coolant Thru, Solid Carbide Drill
Item #: TP348704740
Brand: OSG USA, Inc.
Model #: 8704740
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7.4 mm |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 7.4 mm |
| Tool Type | Taper Drill |
| Length Group | 8xD |
| Measurement Type | Metric |
| Coating | EgiAs |
| Series/List # | 6520 |
| Applicable Material | Stainless Steel | Aluminum / Non-Ferrous Materials | Super-Alloys / Titanium |
| Usable Length (LU) | 81 mm |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Length Chip Flute (LCF) | 81 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 140 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 81 mm |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7.4 mm Dia. × 8 mm Shank × 81 mm Flute Length × 140 mm OAL, 8xD, WXL, 2 Flute, Coolant Thru, Solid Carbide Drill
Item #: TP348684740
Brand: OSG USA, Inc.
Model #: 8684740
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7.4 mm |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 7.4 mm |
| Tool Type | Taper Drill |
| Length Group | 8xD |
| Measurement Type | Metric |
| Coating | WXL |
| Series/List # | 5220 |
| Applicable Material | Steel | Aluminum / Non-Ferrous Materials | Hard Materials |
| Usable Length (LU) | 81 mm |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Length Chip Flute (LCF) | 81 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 140 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 81 mm |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
7.3 mm Dia. × 8 mm Shank × 80 mm Flute Length × 140 mm OAL, 8xD, WXL, 2 Flute, Coolant Thru, Solid Carbide Drill
Item #: TP348684730
Brand: OSG USA, Inc.
Model #: 8684730
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 7.3 mm |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 7.3 mm |
| Tool Type | Taper Drill |
| Length Group | 8xD |
| Measurement Type | Metric |
| Coating | WXL |
| Series/List # | 5220 |
| Applicable Material | Steel | Aluminum / Non-Ferrous Materials | Hard Materials |
| Usable Length (LU) | 80 mm |
| Connection Diameter Machine Side (DCONMS) | 8 mm |
| Length Chip Flute (LCF) | 80 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 140 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 80 mm |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
16508 18.0MM 4FX.030R
Item #: DD1516508
Brand: M A Ford
Model #: 16370870R.030
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 18 mm |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 18 mm |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 25 mm |
| Shank Type | Straight |
| Overall Length (OAL) | 76 mm |
| End Shape | Corner Radius |
| Cutting Edge Material | Carbide |
| Corner Radius (RE) | 0.03 mm |
| Coating | Uncoated |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It