BES Up To 2022 $100-$250 Products - (25001 Products)
12 Lb. Deadblow Hammer
Item #: KY4050192
Manufacturer: PRM Pro
Mfg #: :
Technical Specifications:
•Approx Head Diameter: 3-1/4
•Approximate Handle Length: 36
•Brand Name: PRM Pro
•Handle: Steel Reinforced Polyurethane
•Type: Hot Cast Polyurethane
•Weight: 12 lb
Description:
•One piece hot cast polyurethane construction for safety and durability
•Outlasts rawhide, rubber, lead and other plastic type heads by 10-20 times
•Non-marring, non-sparking, completely formulated to set a new standard for soft face performance
•Shot filled canister provides dead blow action for sustained impact, maximum power and striking force
•Made in the USA
Shipping Info:
•Actual Weight - 12.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® Foamed 9 Piece Non-Reversible Ratcheting Combination Wrench Set- Black Chrome- Spline
Item #: KP4281625
Manufacturer: Proto
Mfg #: JSCR-9SK
Technical Specifications:
•Brand Name: Proto
•Finish: Black Chrome
•Model Number: JSCR-9SK
•Number of Pieces: 9
•Point Size: Spline
•Size: 5x16
Description:
•Black chrome finish is corrosion resistant and visually distinctive
•Non-reversing ratcheting wrenches can be flipped over to turn the fastener in the opposite direction
•Ratcheting spline box end is countersunk for easy application to the fastener
•Spline design also helps prevent rounding of corners and other fastener damage that could lead to foreign object damage (FOD)
•Anti-slip design (ASD) open end
•Fractional spline wrenches can be used on fractional 4, 6, 12 point, spline and Torx® fasteners
Shipping Info:
•Actual Weight - 3.1600
•Dimensions - Height: 4.50 Length: 18.2 Width: 6.40
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Proto® 1" Drive Impact Socket 2-3/16" - 8 Point
Item #: KP4210720
Manufacturer: Proto
Mfg #: J10035S
Technical Specifications:
•Brand Name: Proto
•Drive: 1
•Finish: Black Oxide
•Model Number: J10035S
•Overall Length: 3-1/2
•Point: 8
•Size: 2-3/16
•Type: Standard
Description:
•Drive end chamfer and four detents help provide quick positive engagement with drive tool on any of the socket drive walls
•Tight tolerances for snug fit on fastener
•Large clearance holes, concentric opening and nut end chamfer make it easy to position socket on fasteners
•Made from high-strength steel to help minimize wall thickness and provide access to fasteners in recesses and where nuts and bolts protrude
•Impact sockets are used wherever powered drive tools are used to install or remove fasteners
•Impact sockets are designed to withstand the high torque and force associated with impact tools in repetitive application
•Features two through holes and a groove to accept a Proto® Retaining Ring or pin and O-ring to help secure the socket to the drive tool anvil
Shipping Info:
•Actual Weight - 5.2800
•Dimensions - Height: 3.50 Length: 3.80 Width: 3.80
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
HAZ57 80206 GAL ANTI SIEZ
Item #: LM5080206
Manufacturer: Loctite
Mfg #: 80206
Technical Specifications:
•Brand Name: Loctite
•Hazard Code: HAZ58
Description:
Shipping Info:
•HAZ 57
•UPS Ground - No Additional Shipping Charges
•UPS Air-No Additional Shipping Charges
•Commercial Truck - Call for Shipping Charges
•Note: The additional charges are controlled by UPS and are subject to change.
•Actual Weight - 11.2430
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.060 x 6" - Carbide Tipped Work Rest Blades (In Feed)
Item #: MG93501136
Manufacturer: Workblades
Mfg #: 501136
Technical Specifications:
*Brand Name: Workblades
*Size: .060 x 6
*Type: Carbide Tipped Work Rest Blades
Description:
*Centerless Grinding Carbide Tipped Work Rest Blades
Shipping Info:
*Actual Weight - 1.7000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/32 - 1/2" Capacity - 3JT Mount - Ball Bearing Industrial Drill Chuck
Item #: HK60215000
Manufacturer: Rohm
Mfg #: 215000
Technical Specifications:
*Brand Name: Rohm
*Capacity English: 1/32 - 1/2
*Key Used: K3
*Model Number: BB13-3
*Mount: 3JT
*Type: Ball Bearing Industrial Drill Chuck
Description:
*Ball Bearing Industrial Chuck
*Bodies and jaws hardened and ground
*One piece gear/scroll ring eliminates loss of clamping torque
*Dependable and accurate performance
*Extended life
Shipping Info:
*Actual Weight - 2.0000
*Dimensions - Height: 2.50 Length: 3.90 Width: 2.90
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
V50 150TG COLLET CHUCK
Item #: YG53UL352
Manufacturer: YG-1 Cutting Tools
Mfg #: UL352
Technical Specifications:
*Brand Name: YG-1 Cutting Tools
Description:
Shipping Info:
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
IR20-IR20-200-EX Extension
Item #: SG81ER2020200
Manufacturer: Prime Tool
Mfg #: T12ER20A92
Technical Specifications:
*Base Coupling OD: 1.339 / 34mm
*Base Coupling Size: IR20
*Brand Name: Prime Tool
*Dimension D1: 1.339 / 34mm
*Front End Coupling Size: IR20
*Front OD: 1.339 / 34mm
*Length: 7.874 / 200mm
*Length to Shoulder: 7.874 / 200mm
*Weight: 2.6019 lbs
*Wrench Number: T07IR2004
Description:
*Infinite extension shanks
Shipping Info:
*Actual Weight - 2.6500
*Dimensions - Height: 1.60 Length: 10.0 Width: 1.60
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT50 150TG COLLET CHUCK-EXT
Item #: YG53UI352
Manufacturer: YG-1 Cutting Tools
Mfg #: UI352
Technical Specifications:
*Brand Name: YG-1 Cutting Tools
Description:
Shipping Info:
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
IR16-IR16-200-EX Extension
Item #: SG81ER1616200
Manufacturer: Prime Tool
Mfg #: T12ER16A92
Technical Specifications:
*Base Coupling OD: 1.102 / 28mm
*Base Coupling Size: IR16
*Brand Name: Prime Tool
*Dimension D1: 1.102 / 28mm
*Front End Coupling Size: IR16
*Front OD: 1.102 / 28mm
*Length: 7.874 / 200mm
*Length to Shoulder: 7.874 / 200mm
*Weight: 1.8081 lbs
*Wrench Number: T07ER1601
Description:
*Infinite extension shanks
Shipping Info:
*Actual Weight - 1.8500
*Dimensions - Height: 1.50 Length: 9.60 Width: 1.50
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/16 x 5/8 x 36 - A6 Air Hardening Precision Ground Flat Stock
Item #: LY4458970
Manufacturer: Starrett
Mfg #: 58970
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-6
*Thick: 3/16
*Width: 5/8
Description:
*344 A6 air hardening flat stock is a medium alloyed air hardening tool steel that provides an excellent balance of machinability, toughness and wear resistance
*Lower heat treating temperature results in deep hardness and minimum distortion
Shipping Info:
*Actual Weight - 1.2000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4 x 1-1/4 x 18 - Air Hardening Flat Stock
Item #: LY4557539
Manufacturer: Starrett
Mfg #: 57539
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 3/4
*Width: 1-1/4
Description:
*497 is a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Standard size: +/-.001" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*Ground straight and parallel
Shipping Info:
*Actual Weight - 4.7800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 3/8 x 2 - Oil Hardening Flat Stock
Item #: LY4054413
Manufacturer: Starrett
Mfg #: 54413
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: O-1
*Thick: 3/8
*Width: 2
Description:
*Precision Ground 0-1 Gage Stock 36" Length
*O-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450? _ 1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450? _ 1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125? _1 50?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 7.7400
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/16 x 3 x 24 - 498 Low Carbon Precision Ground Flat Stock
Item #: LY8054957
Manufacturer: Starrett
Mfg #: 54957
Technical Specifications:
*Brand Name: Starrett
*Length: 24
*Material: LC
*Thick: 5/16
*Width: 3
Description:
*Substantial cost reductions over tool steel ground flat stock. There are savings up to 60% because this is a low carbon steel and furnished in 24" lengths. This means that you get one-third more steel at less cost
* Ideal for a wide variety of parts that don't require more expensive heat treated steels, such as stripper plates, jigs, fixtures, machine and component parts, templates, etc.
*This steel can be carburized or case hardened. After hardening, its physical properties, especially tensile strength, yield point, and Brinell hardness, are substantially higher.
*Furnished in 24" (610mm) lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 6.3700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
36 x 1/2 x 3/4 - Air Hardening Flat Stock
Item #: LY4556506
Manufacturer: Starrett
Mfg #: 56506
Technical Specifications:
*Brand Name: Starrett
*Length: 36
*Material: A-2
*Thick: 1/2
*Width: 3/4
Description:
*A-2 Air Hardening Ground Flat Stock 36" Length
*Made from fine grain, electric furnace air-hardening, 5 chrome tool steel
*Has excellent wear and abrasion resistance properties
*Furnished with a fully spheroidized structure and is 100 free of decarb and other surface imperfections.
*Low sulphur content makes it non-freemachining.
*HEAT TREATMENT: Preheat thoroughly at 1450?F, then raise to hardening temperature 1725? _ 1800?F and soak uniformly. For larger sections, use high side; for thin or smaller sections, use low side. Quench in still air or dry air blast at 125? _ 175?F, then Temper Immediately.
*Tolerance Thickness ±.001" Width +.000/.005"
*Larger Sizes A-2 available thru 1" thickness
*Oversize tolerances available thru 2" thickness
*Many other types of gage stock available
*Modified Nutec 42
*A-6 Diecrat
*D-2 Aristocrat
*S-7
*C-1018 Marshallcrat low carbon
Shipping Info:
*Actual Weight - 3.8800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 3/4 x 4 - Oil Hardening Flat Stock
Item #: LY5004809
Manufacturer: Generic USA
Mfg #:
Technical Specifications:
*Brand Name: Generic USA
*Length: 18
*Material: O-1
*Thick: 3/4
*Width: 4
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 15.4000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
5/8 x 1-1/2 x 18 - Oversize Air Hardening Flat Stock
Item #: LY4657208
Manufacturer: Starrett
Mfg #: 57208
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: A-2
*Thick: 5/8
*Width: 1-1/2
Description:
*499 s a A-2 5% chromium air hardening steel with high wear and abrasion resistance
*Oversize: +.010"/.015" thickness tolerance
*Maintains close dimensional accuracy throughout the heat treating process
*The 5% chromium content makes this steel especially desirable for punches and dies to be used in long production runs since it gives the tools far longer life.
*Up to 50% more pieces per sharpening can be produced than with oil hardening steel
*High wear resistance is also ideal for punches and dies to stamp silicon, stainless steels, monel metal and other types of abrasive material
*Maintains close dimensional accuracy throughout the heat treating process. The wide 75? hardening range make this virtually foolproof
*Full-length identification eliminates confusion with other steels
*Furnished in 18" and 36" lengths, ground straight and parallel
Shipping Info:
*Actual Weight - 4.7800
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.490X.750 PCD TIPPED BOR
Item #: GE971085600
Brand: Internal Tool
Model #: 108-5600
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | 108 |
| Cutting Depth Maximum (CDX) | 3/4″ |
| Minimum Bore Diameter (DMIN) | 0.49″ |
| Overall Length (OAL) | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.490X1.500 PCD TIPPED BOR
Item #: GE971085700
Brand: Internal Tool
Model #: 108-5700
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | 112 |
| Cutting Depth Maximum (CDX) | 1-1/2″ |
| Minimum Bore Diameter (DMIN) | 0.49″ |
| Overall Length (OAL) | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
.490X.750 CBN TIPPED BOR
Item #: GE971081600
Brand: Internal Tool
Model #: 108-1600
| Product Specifications | |
|---|---|
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | 108 |
| Cutting Depth Maximum (CDX) | 3/4″ |
| Minimum Bore Diameter (DMIN) | 0.49″ |
| Overall Length (OAL) | 3″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It