BES Up To 2022 $100-$250 Products - (25001 Products)
BT40 1-1/2 x 4.625 End Mill Holder
Item #: GM604501154
Manufacturer: ETM
Mfg #: 4501154
Technical Specifications:
*Brand Name: ETM
*Gage Length: 4.620
*Model Number: 4501154
*Nose: 3.150
*Shank: BT40
*Size: 1-1/2
*Type: V-Flange End Mill Holder
*Weight: 7.4 lbs
Description:
*Endmill Holder
*Run out accurace .0002"
*Taper class AT3
*Hardness 58-60 HRc
*NS Taper Finish
Shipping Info:
*Actual Weight - 7.4090
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
BT40 100DA COLLET CHUCK
Item #: GM73B4017010060
Manufacturer: Lyndex
Mfg #: B4017-0100
Technical Specifications:
*Brand Name: Lyndex
Description:
Shipping Info:
*Actual Weight - .9900
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 x ER20-2.76 w/ Coolflex - Collet Chuck
Item #: TE1222235F
Manufacturer: Techniks
Mfg #: 22235F
Technical Specifications:
*Brand Name: Techniks
*Capacity: ER20
*Chuck Size: CAT40
*Collets Included: No
*Coolant Supply: Coolant-thru Flange (DIN B) or thru Spindle with Coolant Capable Rentention Knob, sold separately
*Head Length/Projection: 2.76
*Model Number: 22235F
*Mount: CAT40
*Nut Diameter: 1.34
*Overall Length: 5.45
*Size/Range: .019 - .551
*Spindle Interface: CAT40
*Weight: 2.55 lbs
*Wrench Number: TE1204610
Description:
*Techniks Precision CoolFLEX Collet Chuck holders Holders offer coolant capability either through the spindle or through the flange (DIN B
* Simply remove two stop screws for DIN B
*The holder is balanced to 25,000 RPM at G2.5 and achieves T.I.R. of 0.0001" or better from taper to collet pocket
*Each holder is Techniks Certified for accuracy and balance and comes with a complete lab report
*
Shipping Info:
*Actual Weight - 2.5500
*Dimensions - Height: 6.00 Length: 3.00 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
4MT Long Series Full High Speed - Dead Center
Item #: HK2264504
Manufacturer: Riten
Mfg #: 64504
Technical Specifications:
*Accuracy: .0001
*Brand Name: Riten
*Description: Morse Taper
*Mount: 4 MT
*Overall Length: 7-3/4
*Point Diameter: 1.231
*Point Length: 3-11/16
*Point Style: High Speed
*Style: Long Series Full
*Type: Dead Centers
Description:
*Long Series Full Dead Center - High Speed Steel
*Accuracy guaranteed to ± .00005
*Through-hardened to 61-63 Rc.
*Riten full service and repair
*Applying a Moly EP632 greas on the point will reduce friction and wear
Shipping Info:
*Actual Weight - 3.0000
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Taper/CAT V-Flange Adaptor -5MT IT; CAT50 OT
Item #: GM6568235
Manufacturer: Collis
Mfg #: 68235
Technical Specifications:
*Brand Name: Collis
*Gage Length: 3.7500
*Inside Taper: 5MT
*Nose: 2.75
*Outside Taper: CAT50
*Type: Morse Taper to CAT V-Flange Adaptor
Description:
* 40 & 50 Taper Caterpillar V-Flange M.T. Adapters
Shipping Info:
*Actual Weight - 7.4700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1/4″ Dia. × 1/4″ Shank × 3/4″ DOC × 2-1/2″ OAL, Carbide Diamond, Spiral , 4 Flute, 30° Helix, Ballnose End Mill
Item #: DD9491281
Brand: KYOCERA SGS Precision Tools
Model #: 91281
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/4″ |
| Flute Count (NOF) | 4 |
| Connection Diameter Machine Side (DCONMS) | 1/4″ |
| Flute Helix Angle (FHA) | 30 Degrees |
| Depth of Cut Maximum (APMX) | 3/4″ |
| Usable Length (LU) | 1-3/4″ |
| Overall Length (OAL) | 2-1/2″ |
| Flute Type | Spiral |
| Cutting Edge Material | Carbide |
| Style | Ball Nose |
| Coating | Diamond |
| Decimal Equivalent | 0.25″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4X3/4X2.1/4X5 SC FIN
Item #: WK402863656
Brand: Widia
Model #: 2863656
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Flute Count (NOF) | 3 |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Flute Helix Angle (FHA) | CW|37 Degrees |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| Shank Type | Round |
| Overall Length (OAL) | 5″ |
| Usable Length (LU) | 2-1/4″ |
| Cutting Edge Material | Carbide |
| Grade | UNCOATED |
| Coating | Uncoated |
| Decimal Equivalent | 0.75″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
SC FIN 3FL 3/4X3/4X2.1/4X5
Item #: WK402234580
Brand: Widia
Model #: 2234580
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Flute Helix Angle (FHA) | 37 Degrees|CW |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Shank Type | Round |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| End Shape | Square |
| Overall Length (OAL) | 5″ |
| Usable Length (LU) | 2-1/4″ |
| Cutting Edge Material | Carbide |
| Applicable Material | Aluminum / Non-Ferrous Materials |
| Coating | Uncoated |
| Tool Type | Center Cut|Single-End |
| Flute Count (NOF) | 3 |
| Decimal Equivalent | 0.75″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
15/16 MCT T SH BRIDGE
Item #: MT5122729
Brand: Morse Cutting Tools
Model #: 22729
| Product Specifications | |
|---|---|
| Tool Type | Reamer |
| Coolant Supply Property (CSP) | No |
| Size | 15/16 |
| Flute Type | Left Hand Spiral/Right Hand Cut |
| Cutting Diameter (DC) | 0″ |
| Shank Type | Taper |
| Length Chip Flute (LCF) | 7-3/8″ |
| Small End Diameter | 5/8″ |
| Overall Length (OAL) | 12″ |
| Style | Bridge Reamer |
| Connection Diameter Machine Side (DCONMS) | 3 MT |
| Cutting Edge Material | High Speed Steel |
| Shank Size (SS) | 3MT |
| Measurement Type | Inch |
| Cutting Direction (HAND) | Right Hand |
| Series/List # | 1701 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Q Dia. x 11/32″ Shank × 93 mm Flute Length × 150 mm OAL, 8xD, WXL, 2 Flute, Coolant Thru, Solid Carbide Drill
Item #: TP34522033112
Brand: OSG USA, Inc.
Model #: 522033112
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | Q |
| Cutting Edge Material | Carbide |
| Drill Bit Size / Cutting Diameter (DC) - Letter / Wire Gauge | Q |
| Tool Type | Taper Drill |
| Length Group | 8xD |
| Measurement Type | Letter |
| Coating | WXL |
| Series/List # | 5220 |
| Applicable Material | Steel | Aluminum / Non-Ferrous Materials | Hard Materials |
| Usable Length (LU) | 93 mm |
| Connection Diameter Machine Side (DCONMS) | 11/32″ |
| Length Chip Flute (LCF) | 93 mm |
| Coolant Supply Property (CSP) | Coolant Thru |
| Overall Length (OAL) | 150 mm |
| Point Angle (SIG) | 140 Degrees |
| Flute Count (NOF) | 2 |
| Functional Length (LF) | 93 mm |
| Cutting Direction (HAND) | Right Hand |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18493 1X1/2X3
Item #: CR1118493
Brand: Melin Tool Co
Model #: 18493
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Point Angle (SIG) | 60 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C1 |
| Flute Count (NOF) | 1 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18990 1X1/2X3 4FL
Item #: CR1118990
Brand: Melin Tool Co
Model #: 18990
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Point Angle (SIG) | 120 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C4 |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18494 1X1/2X3
Item #: CR1118494
Brand: Melin Tool Co
Model #: 18494
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Point Angle (SIG) | 82 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C1 |
| Flute Count (NOF) | 1 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11569 7/8X1/2X3
Item #: CR1111569
Brand: Melin Tool Co
Model #: 11569
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/8″ |
| Point Angle (SIG) | 90 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C6 |
| Flute Count (NOF) | 6 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
11567 7/8X1/2X3
Item #: CR1111567
Brand: Melin Tool Co
Model #: 11567
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 7/8″ |
| Point Angle (SIG) | 82 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C6 |
| Flute Count (NOF) | 6 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18987 1X1/2X3 4FL
Item #: CR1118987
Brand: Melin Tool Co
Model #: 18987
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Point Angle (SIG) | 90 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C4 |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18831 1X1/2X3 4FL
Item #: CR1118831
Brand: Melin Tool Co
Model #: 18831
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Point Angle (SIG) | 82 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C4 |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18495 1X1/2X3
Item #: CR1118495
Brand: Melin Tool Co
Model #: 18495
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Point Angle (SIG) | 90 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C1 |
| Flute Count (NOF) | 1 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18488 1X1/2X3 6FL
Item #: CR1118488
Brand: Melin Tool Co
Model #: 18488
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Point Angle (SIG) | 60 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C6 |
| Flute Count (NOF) | 6 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18986 1X1/2X3 4FL
Item #: CR1118986
Brand: Melin Tool Co
Model #: 18986
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Point Angle (SIG) | 60 Degrees |
| Overall Length (OAL) | 3″ |
| Cutting Edge Material | Carbide |
| Connection Diameter Machine Side (DCONMS) | 1/2″ |
| Series/List # | C4 |
| Flute Count (NOF) | 4 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It