BES Up To 2022 $100-$250 Products - (25001 Products)
CAT40 x ER11 x 2.5" Collet Holder
Item #: GM664501440
Manufacturer: ETM
Mfg #: 4501440
Technical Specifications:
*Brand Name: ETM
*Collet Style: ER11
*Head Length/Projection: 2.50
*Model Number: 4501440
*Mount: CAT40
*Nose Diameter: .79
*Type: V-Flange Integral Extension Collet Chuck
*Weight: 2.42 lbs
Description:
*Balance rings
*Run out O.D. - I.D. Max. 0.003
*Mass symmetrical design
*For high spindle speed from 20,000 RPM
*Superior surface finish Ra 0.0004
*Taper accuracy DIn standard 85% fitness
Shipping Info:
*Actual Weight - 2.4200
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 x ER25 x 8 - Collet Chuck
Item #: TE1222251
Manufacturer: Techniks
Mfg #: 22251
Technical Specifications:
*Brand Name: Techniks
*Capacity: ER25
*Chuck Size: CAT40
*Collet Style: ER25
*Collets Included: No
*Coolant Supply: Coolant-thru Spindle with Coolant Capable Retention Knob, sold separately
*Head Length/Projection: 8.00
*Model Number: 22251
*Mount: CAT40
*Nose Diameter: 1.66
*Nut Diameter: 1.65
*Overall Length: 10.69
*Size/Range: .039 - .75
*Spindle Interface: CAT40
*Weight: 5.622 lbs
*Wrench Number: TE1204615
Description:
*Techniks Collet Chucks are balanced to 25,000 RPM at G2.5 tolerance
*They are individually lab tested for accuracy and balance and come with their individual performance report
*Techniks holders achieve 0.0001" or less T.I.R. as measured from the taper to the collet pocket
*
Shipping Info:
*Actual Weight - 5.6220
*Dimensions - Height: 13.0 Length: 3.00 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 ER20X3.937
Item #: GM664501443
Brand: Iscar
Model #: 4501443
| Product Specifications | |
|---|---|
| Shank Size (SS) | 40 |
| Coolant Supply Property (CSP) | External |
| Connection Size (CSI) | ER20 |
| Connection Diameter Minimum Workpiece Side (DCONNWS) | 0.041″ |
| Body Diameter (BD) | 1.339″ |
| Connection Diameter Maximum Workpiece Side (DCONXWS) | 0.514″ |
| Protruding Length (LPR) | 3.937″ |
| Measurement Type | Inch |
| Connection Diameter Machine Side (DCONMS) | 40″ |
| Body Material | Steel |
| Tool Type | DIN 69871 |
| Connection Code Machine Side (CCMS) | CAT |
| Style | ER20 |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 x ER16 x 2-3/4" Collet Chuck
Item #: GM66304016
Manufacturer: ETM
Mfg #: 4501442
Technical Specifications:
*Brand Name: ETM
*Collet Style: ER16
*Head Length/Projection: 2.75
*Mount: CAT40
*Nose Diameter: 1.11
*Type: V-Flange Integral Extension Collet Chuck
Description:
*Balance rings
*Run out O.D. - I.D. Max. 0.003
*Mass symmetrical design
*For high spindle speed from 20,000 RPM
*Superior surface finish Ra 0.0004
*Taper accuracy DIn standard 85% fitness
Shipping Info:
*Actual Weight - 2.5140
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 x ER20 x 4 - Collet Chuck
Item #: TE1222291
Manufacturer: Techniks
Mfg #: 22291
Technical Specifications:
*Brand Name: Techniks
*Capacity: ER20
*Chuck Size: CAT50
*Collet Style: ER20
*Collets Included: No
*Coolant Supply: Coolant-thru Spindle with Coolant Capable Retention Knob, sold separately
*Head Length/Projection: 4.00
*Model Number: 22291
*Mount: CAT50
*Nose Diameter: 1.34
*Nut Diameter: 1.34
*Overall Length: 8
*Size/Range: .019 - .551
*Spindle Interface: CAT50
*Weight: 9.259 lbs
*Wrench Number: TE1204610
Description:
*Techniks Collet Chucks are balanced to 25,000 RPM at G2.5 tolerance
*They are individually lab tested for accuracy and balance and come with their individual performance report
*Techniks holders achieve 0.0001" or less T.I.R. as measured from the taper to the collet pocket
*
Shipping Info:
*Actual Weight - 9.2590
*Dimensions - Height: 10.0 Length: 5.00 Width: 5.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 x ER16 x 3-15/16" Collet Chuck
Item #: GM66304116
Manufacturer: ETM
Mfg #: 4501448
Technical Specifications:
*Brand Name: ETM
*Collet Style: ER16
*Head Length/Projection: 3.93
*Mount: CAT40
*Nose Diameter: 1.11
*Type: V-Flange Integral Extension Collet Chuck
Description:
*Balance rings
*Run out O.D. - I.D. Max. 0.003
*Mass symmetrical design
*For high spindle speed from 20,000 RPM
*Superior surface finish Ra 0.0004
*Taper accuracy DIn standard 85% fitness
Shipping Info:
*Actual Weight - 2.7670
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT40 x ER16 x 8 - Collet Chuck
Item #: TE1222233
Manufacturer: Techniks
Mfg #: 22233
Technical Specifications:
*Brand Name: Techniks
*Capacity: ER16
*Chuck Size: CAT40
*Collet Style: ER16
*Collets Included: No
*Coolant Supply: Coolant-thru Spindle with Coolant Capable Retention Knob, sold separately
*Head Length/Projection: 8.00
*Model Number: 22233
*Mount: CAT40
*Nose Diameter: 1.11
*Nut Diameter: 1.08
*Overall Length: 10.69
*Size/Range: .019 - .413
*Spindle Interface: CAT40
*Weight: 3.75 lbs
*Wrench Number: TE1204609
Description:
*Techniks Collet Chucks are balanced to 25,000 RPM at G2.5 tolerance
*They are individually lab tested for accuracy and balance and come with their individual performance report
*Techniks holders achieve 0.0001" or less T.I.R. as measured from the taper to the collet pocket
*
Shipping Info:
*Actual Weight - 3.7500
*Dimensions - Height: 11.0 Length: 3.00 Width: 3.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 x ER20 x 6 - Collet Chuck
Item #: TE1222293
Manufacturer: Techniks
Mfg #: 22293
Technical Specifications:
*Brand Name: Techniks
*Capacity: ER20
*Chuck Size: CAT50
*Collet Style: ER20
*Collets Included: No
*Coolant Supply: Coolant-thru Spindle with Coolant Capable Retention Knob, sold separately
*Head Length/Projection: 6.00
*Model Number: 22293
*Mount: CAT50
*Nose Diameter: 1.34
*Nut Diameter: 1.34
*Overall Length: 10
*Size/Range: .019 - .551
*Spindle Interface: CAT50
*Weight: 9.811 lbs
*Wrench Number: TE1204610
Description:
*Techniks Collet Chucks are balanced to 25,000 RPM at G2.5 tolerance
*They are individually lab tested for accuracy and balance and come with their individual performance report
*Techniks holders achieve 0.0001" or less T.I.R. as measured from the taper to the collet pocket
*
Shipping Info:
*Actual Weight - 9.8110
*Dimensions - Height: 11.0 Length: 5.00 Width: 5.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1" x ER25M-140mm - Collet Chuck
Item #: TE1204888
Manufacturer: Techniks
Mfg #: 4888
Technical Specifications:
*Brand Name: Techniks
*Capacity: ER25M
*Chuck Size: 1" End Mill / Collet Chuck
*Collets Included: No
*Coolant Supply: Coolant-thru Spindle
*Head Length/Projection: 50mm
*Model Number: 04888
*Mount: 1" End Mill / Collet Chuck
*Nut Diameter: 1.38
*Overall Length: 190mm
*Size/Range: .039 - .75
*Spindle Interface: End Mill / Collet Chuck
*Weight: 1.2 lbs
*Wrench Number: TE1204624
Description:
*Techniks Collet Chuck Extensions are precision ground to achieve T.I.R. of 0.0001" or less
* Each holder includes a PowerCOAT Nut for superior holding power
*
Shipping Info:
*Actual Weight - 1.2000
*Dimensions - Height: 8.00 Length: 2.00 Width: 2.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CAT50 x ER40 x 4 - Collet Chuck
Item #: TE1222321
Manufacturer: Techniks
Mfg #: 22321
Technical Specifications:
*Brand Name: Techniks
*Capacity: ER40
*Chuck Size: CAT50
*Collet Style: ER40
*Collets Included: No
*Coolant Supply: Coolant-thru Spindle with Coolant Capable Retention Knob, sold separately
*Head Length/Projection: 4.00
*Model Number: 22321
*Mount: CAT50
*Nose Diameter: 2.49
*Nut Diameter: 2.48
*Overall Length: 8
*Size/Range: .086 - 1.024
*Spindle Interface: CAT50
*Weight: 8.75 lbs
*Wrench Number: TE1204617
Description:
*Techniks Collet Chucks are balanced to 25,000 RPM at G2.5 tolerance
*They are individually lab tested for accuracy and balance and come with their individual performance report
*Techniks holders achieve 0.0001" or less T.I.R. as measured from the taper to the collet pocket
*
Shipping Info:
*Actual Weight - 8.7500
*Dimensions - Height: 10.0 Length: 5.00 Width: 5.00
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
260838 SLEEVE
Item #: FF8650637
Manufacturer: Sandvik Coromant
Mfg #: 5757508
Technical Specifications:
*Brand Name: Sandvik Coromant
Description:
Shipping Info:
*Actual Weight - 1.7622
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
18 x 7/32 x 6 - Oil Hardening Flat Stock
Item #: LY4054067
Manufacturer: Starrett
Mfg #: 54067
Technical Specifications:
*Brand Name: Starrett
*Length: 18
*Material: O-1
*Thick: 7/32
*Width: 6
Description:
*Precision Ground 0-1 Gage Stock 18" Length
*0-1 Oil Hardening Ground Flat Stock
*Electric furnace melt oil-hardening tool steel supplied with a fully spheroidized structure
*Non-shrinking general purpose tool steel
*HEAT TREATMENT: For sections smaller than 1/4" heat to 1450?_1475?F& hold until heated through. For larger sections, preheat to 1200?F, then raise to 1450?_1500?F hardening temperature, hold half an hour per inch of cross section. Quench in oil at 125?_150?F & Temper Immediately.
*Tolerance Thickness ±.001" Width +.000 / .005"
Shipping Info:
*Actual Weight - 6.7700
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
3/4 4FL SE LG 2 1/4X5
Item #: DC26215001083
Brand: MTC
Model #: 62699
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 3/4″ |
| Applicable Material | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Connection Diameter Machine Side (DCONMS) | 3/4″ |
| Application | Slotting | Profiling | Ramping |
| Depth of Cut Maximum (APMX) | 2-1/4″ |
| Grade | C-2 Sub-Micron |
| Overall Length (OAL) | 5″ |
| Length Group | Long |
| Cutting Edge Material | Solid Tungsten Carbide |
| Decimal Equivalent | 0.75″ |
| Coating | AlTiN |
| Cutting Direction (HAND) | Right Hand |
| Flute Count (NOF) | 4 |
| Single / Double End | Single End |
| Flute Helix Angle (FHA) | 30 Degrees |
| Center Cutting | Yes |
| End Shape | Square |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.4 mm Dia. × 14 mm Shank × 87 mm Flute Length × 148 mm OAL, Jobber, 135°, Aqua Revo D, 2 Flute, External, Solid Carbide Drill
Item #: AC860773301
Brand: Nachi America Inc
Model #: 0773301
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.4 mm |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5276″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.4 mm |
| Measurement Type | Metric |
| Length Group | Jobber |
| Series/List # | L9862 |
| Coating | Aqua Revo D |
| Usable Length (LU) | 87 mm |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Length Chip Flute (LCF) | 87 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Overall Length (OAL) | 148 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 24-30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
Brand: Glastonbury Gage & Southern Gage - GSG / Part #: GSG-CR-1.7609M
Item #: 40009839
Brand: Glastonbury Gage & Southern Gage - GSG
Model #: GSG-CR-1.7609MProduct Specifications
Material
Solid Carbide
Tolerance (Decimal Inch)
+0.00002/-0.00002
Blank Number Wire Size
#6
Inner Diameter (Decimal Inch)
1.7609
Calibrated
No
Traceability Certification Included
No
Standards
B47.1 Gage Standards; ASME B89.1.6
Go/No Go
Master
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
CRDCN204CD Toolholder
Item #: FJ10U104009
Brand: Sumitomo
Model #: U104009
| Product Specifications | |
|---|---|
| Shank Height (H) | 1 1/4″ |
| Head Length (LH) | 1.3″ |
| Shank Width (B) | 1 1/4″ |
| Cutting Direction (HAND) | Neutral |
| Protruding Length (LPR) | 5/8″ |
| Shank Type | Square |
| Overall Length (OAL) | 6″ |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
1″ × 1″ × 2″ × 4-1/2″ LHS / LHC HSS-E (PM) Powder Metal High Helix Finishing End Mill-3F SE CC LH - Bright
Item #: CE60C40310
Brand: Cleveland
Model #: C40310
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1″ |
| Application | Finishing |
| Connection Diameter Machine Side (DCONMS) | 1″ |
| Tool Type | End Mill |
| Depth of Cut Maximum (APMX) | 2″ |
| Flute Type | Spiral |
| Overall Length (OAL) | 4-1/2″ |
| Decimal Equivalent | 1″ |
| Cutting Edge Material | HSSPM |
| Measurement Type | Inch |
| Coating | Bright |
| Series/List # | PM-539L |
| Flute Count (NOF) | 3 |
| Cutting Direction (HAND) | Left Hand |
| Shank Type | Weldon |
| Single / Double End | Single End |
| End Shape | Square |
| Trade Name | PM-Plus |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
End Mills - Reduced Shank End Mills - 0.5000″ (1/2″) Cutter Diameter × 0.7500″ (3/4″) Length of Cut Carbide Reduce Shank Square End Mill, 4 Flutes, AlTiN Coated
Item #: GE90943232C3
Brand: Harvey Tool
Model #: 943232-C3
| Product Specifications | |
|---|---|
| Cutting Diameter (DC) | 1/2″ |
| Coating | AlTiN |
| Connection Diameter Machine Side (DCONMS) | 7/16″ |
| Flute Count (NOF) | 4 |
| Depth of Cut Maximum (APMX) | 3/4″ |
| End Shape | Square |
| Overall Length (OAL) | 6″ |
| Decimal Equivalent | 0.5″ |
| Cutting Edge Material | Carbide |
| Measurement Type | Inch |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.3 mm Dia. × 14 mm Shank × 87 mm Flute Length × 148 mm OAL, Jobber, 135°, Aqua Revo D, 2 Flute, External, Solid Carbide Drill
Item #: AC860773296
Brand: Nachi America Inc
Model #: 0773296
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.3 mm |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5236″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.3 mm |
| Measurement Type | Metric |
| Length Group | Jobber |
| Series/List # | L9862 |
| Coating | Aqua Revo D |
| Usable Length (LU) | 87 mm |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Length Chip Flute (LCF) | 87 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Overall Length (OAL) | 148 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 24-30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It
13.7 mm Dia. × 14 mm Shank × 90 mm Flute Length × 148 mm OAL, Jobber, 135°, Aqua Revo D, 2 Flute, External, Solid Carbide Drill
Item #: AC860773330
Brand: Nachi America Inc
Model #: 0773330
| Product Specifications | |
|---|---|
| Drill Bit Size / Cutting Diameter (DC) | 13.7 mm |
| Cutting Edge Material | Carbide |
| Decimal Equivalent | 0.5394″ |
| Tool Type | Drill |
| Drill Bit Size / Cutting Diameter (DC) - Metric | 13.7 mm |
| Measurement Type | Metric |
| Length Group | Jobber |
| Series/List # | L9862 |
| Coating | Aqua Revo D |
| Usable Length (LU) | 90 mm |
| Applicable Material | Steel | Stainless Steel | Cast Iron | Hard Materials | Super-Alloys / Titanium |
| Length Chip Flute (LCF) | 90 mm |
| Connection Diameter Machine Side (DCONMS) | 14 mm |
| Overall Length (OAL) | 148 mm |
| Coolant Supply Property (CSP) | External |
| Flute Count (NOF) | 2 |
| Point Angle (SIG) | 135 Degrees |
| Cutting Direction (HAND) | Right Hand |
| Flute Helix Angle (FHA) | 24-30 Degrees |
2% Off All Online Orders
Use Code: 2%OFF
Best Price Guarantee - Email Us A Better Published Price and We'll Beat It